101.6-mm mirror mount, stainless steel, high-stability, front-loading, 2 hex adjusters

MHX-101.6A

Higher moment of inertia to maximize stiffness and faster to reach thermal equilibrium characteristics are achieved by a hollow-frame design. Ideal for interference measurement or precision measurement.
Please check for an introduction video of the structure and features of MHX.
MHX-F has three adjustment axes screws that allow the reflecting surface to be moved back and forth in addition to the adjustment of tilt and rotation. (MHX-A has only 2 axes of adjustment screws, so it can only be used for adjustment of tilt and rotation.
Adhesive holes for mirror adhesion and pin holes for anti-rotation and positioning are equipped.
High-density stainless steel is used for the material, but the weight has been reduced by reducing the thickness.
The frame design provides a higher moment of inertia to maximize stiffness and reduced-mass sections allowing it to reach thermal equilibrium faster for maximum stability.
More Information
Name 101.6-mm mirror mount, stainless steel, high-stability, front-loading, 2 hex adjusters
Weight 1.1300kgs
Guide In addition, a special screwed knob (MHX-K-M6) is also available instead of the hexagon wrench.
  • A special lock (MHK-L-M6) for holding the adjusted angle is also available.
  • Optic Loading Side Front Loading
    Angle Range ±2°
    Material Stainless Steel
    Number of Control Axes 2 Axes
    Optic Diameter φ101.6mm
    Mount Material Stainless Steel
    Compatible Optics Diameter 101.6mm (4 in.)
    Compatible Optics Thickness 10 - 20mm
    Mirror Loading Front
    Mirror Clamping Mechanism Set Screw with Torsion Barrier, 2-mm (5/64-in.) Hex Key
    Number of Adjustment Axes 2 points
    Angular Travel Range +/-2 Deg
    Linear Travel Range N/A
    Adjuster Thread M6 x 0.250mm (~100 TPI)
    Standardized Adjustment Sensitivity (based on 1 deg. knob rotation) 13 μrad
    Typical Adjustment Sensitivity 2 +/-1 urad
    Dowel Pin Keys 2mm Slot and Hole
    Standard Mounting Clearance hole for M6 / 1/4-20 screws
    Center-Post Mounting M6 and 1/4-20 threaded holes
    In stock
    SKU
    MHX-101.6A
    $987.00

    Delivery in : 2 weeks

    Higher moment of inertia to maximize stiffness and faster to reach thermal equilibrium characteristics are achieved by a hollow-frame design. Ideal for interference measurement or precision measurement.
    Please check for an introduction video of the structure and features of MHX.