Cage Fixed Shift Plate

C30-OFS-0.33

When the beam passes a plate type beamsplitter, the beam is shifted due to its thickness.
C30-OFS can compensate the beam shift by a plate type beamsplitter to the center of the optics.
◦Can be selected from three types according to the amount of shift by the thickness of the beamsplitter of 1mm, 3mm or 5mm.
◦Use with Cage Rod (C30-RO-6-10, 4pcs)



More Information
Name Cage Fixed Shift Plate
Weight 0.0240kgs
Guide ◦Can be selected from three types according to the amount of shift by the thickness of the beamsplitter of 1mm, 3mm or 5mm.
◦Use with Cage Rod (C30-RO-6-10, 4pcs)
Attention ▶The shift amount of the beamsplitter depends on the angle of incidence, wavelength and material.
If the beamsplitter is used at an angle of incidence of 45 deg.., in visible light (e-line), and made of a material other than BK7, it may deviate from the center of the cage (the center of the optics). For the calculation of the shift amount, please refer to the "Optical Formula" in the Optical Data section of the Optical Element Guidance.
Primary material Aluminum
Guide Rod Diameter (Spaceing between rod) φ6mm (30x30mm)
Optics Thickness 1mm
Off set About 0.33mm
Thougth Hole Diameter φ32mm
Installation Slide from the end of rods
In stock
SKU
C30-OFS-0.33
$39.00

Delivery in : 2 weeks

When the beam passes a plate type beamsplitter, the beam is shifted due to its thickness.
C30-OFS can compensate the beam shift by a plate type beamsplitter to the center of the optics.