101.6-mm mirror mount, stainless steel, high-stability, front-loading, 2 hex adjusters
MHX-101.6A
Higher moment of inertia to maximize stiffness and faster to reach thermal equilibrium characteristics are achieved by a hollow-frame design. Ideal for interference measurement or precision measurement.
Please check for an introduction video of the structure and features of MHX.
Please check for an introduction video of the structure and features of MHX.
MHX-F has three adjustment axes screws that allow the reflecting surface to be moved back and forth in addition to the adjustment of tilt and rotation. (MHX-A has only 2 axes of adjustment screws, so it can only be used for adjustment of tilt and rotation.
Adhesive holes for mirror adhesion and pin holes for anti-rotation and positioning are equipped.
High-density stainless steel is used for the material, but the weight has been reduced by reducing the thickness.
The frame design provides a higher moment of inertia to maximize stiffness and reduced-mass sections allowing it to reach thermal equilibrium faster for maximum stability.
Adhesive holes for mirror adhesion and pin holes for anti-rotation and positioning are equipped.
High-density stainless steel is used for the material, but the weight has been reduced by reducing the thickness.
The frame design provides a higher moment of inertia to maximize stiffness and reduced-mass sections allowing it to reach thermal equilibrium faster for maximum stability.
| Name | 101.6-mm mirror mount, stainless steel, high-stability, front-loading, 2 hex adjusters |
|---|---|
| Weight | 1.1300kgs |
| Guide |
In addition, a special screwed knob (MHX-K-M6) is also available instead of the hexagon wrench.
|
| Optic Loading Side | Front Loading |
| Angle Range | ±2° |
| Material | Stainless Steel |
| Number of Control Axes | 2 Axes |
| Optic Diameter | φ101.6mm |
| Mount Material | Stainless Steel |
| Compatible Optics Diameter | 101.6mm (4 in.) |
| Compatible Optics Thickness | 10 - 20mm |
| Mirror Loading | Front |
| Mirror Clamping Mechanism | Set Screw with Torsion Barrier, 2-mm (5/64-in.) Hex Key |
| Recommended Mirror Clamping Torque | 0.07 +/-0.01 Nm (10+/-2 oz.-in.) |
| Number of Adjustment Axes | 2 points |
| Angular Travel Range | +/-2 Deg |
| Linear Travel Range | N/A |
| Adjuster Thread | M6 x 0.250mm (~100 TPI) |
| Standardized Adjustment Sensitivity (based on 1 deg. knob rotation) | 13 μrad |
| Typical Adjustment Sensitivity | 2 +/-1 urad |
| Dowel Pin Keys | 2mm Slot and Hole |
| Standard Mounting | Clearance hole for M6 / 1/4-20 screws |
| Center-Post Mounting | M6 and 1/4-20 threaded holes |
In stock
SKU
MHX-101.6A
$987.00
Customize product
Higher moment of inertia to maximize stiffness and faster to reach thermal equilibrium characteristics are achieved by a hollow-frame design. Ideal for interference measurement or precision measurement.
Please check for an introduction video of the structure and features of MHX.
Please check for an introduction video of the structure and features of MHX.
Related Products
Check items to add to the cart or
