25.4-mm, Welded Stainless Steel Flexure Mirror Mount, Bulkhead Mounting

FM-25.4

FM series mirror mounts have a welded, unibody design making them exceptionally slim and sturdy - Ideal for industrial Set-and-Forget alignment. Two thin, stiff flexures allow the mount's pitch and yaw axes to be adjusted independently. FM Flexure Mounts are designed to be bulkhead mounted, i.e. mounted onto a vertical surface. Not only does this save space, but it also increases stability because the mount takes on the structure of the bulkhead. A mirror can be mounted on either of the FM mirror mount's sides, allowing you to choose whether you want to adjust it from the front or back. The FM mounts are loaded with other valuable features like adhesive wells, and keying pin slots. These all-stainless steel mounts are made for standard 12.7-mm (0.5-in.), 25.4-mm (1-in.), and 50.8-mm (2-in.) diameter mirrors.
All FM and FM-L Flexure Mounts use precision 0.250mm (over 100-TPI) thread pitch adjustment screws for exceptional stability and adjustability.
More Information
Name 25.4-mm, Welded Stainless Steel Flexure Mirror Mount, Bulkhead Mounting
Weight 0.0700kgs
Attention This mount is a welded assembly and cannot be disassembled.
Angle Range ±1.5°
Material Stainless Steel
Number of Control Axes 2 Axes
Optic Diameter φ25.4mm
Mount Material Stainless Steel
Compatible Optics Diameter 25, 25.4mm
Compatible Optics Thickness 3 - 7mm
Mirror Loading Front, both sides of mount
Mirror Clamping Mechanism Adhesive or Set Screw, 0.9-mm Hex Key
Number of Adjustment Axes 2 points
Angular Travel Range +/-1.5 deg.
Adjuster Thread M3 x 0.250mm(~100 TPI)
Dowel Pin Keys 2mm Slot and Hole
Bulkhead Mounting Threaded and clearance holes for M3 screws
In stock
SKU
FM-25.4
$149.00

Delivery in : in stock

FM series mirror mounts have a welded, unibody design making them exceptionally slim and sturdy - Ideal for industrial Set-and-Forget alignment. Two thin, stiff flexures allow the mount's pitch and yaw axes to be adjusted independently. FM Flexure Mounts are designed to be bulkhead mounted, i.e. mounted onto a vertical surface. Not only does this save space, but it also increases stability because the mount takes on the structure of the bulkhead. A mirror can be mounted on either of the FM mirror mount's sides, allowing you to choose whether you want to adjust it from the front or back. The FM mounts are loaded with other valuable features like adhesive wells, and keying pin slots. These all-stainless steel mounts are made for standard 12.7-mm (0.5-in.), 25.4-mm (1-in.), and 50.8-mm (2-in.) diameter mirrors.

Resources & Downloads