Wedged Substrate BK7 50mm Diameter 2 Degree Wedge Angle λ/10

WSB-50C08-10-2

Wedged substrates can separate the reflected beam by the front and back surface of the substrates by the slight wedge angle. They can be used as a reference test plate for interferometers and beam samplers.
◦It can also be used as a prism to refract at a small angle. Beam deflection angle δ can be calculated refractive index n, from the wedge angle α.
δ = sin−1( n sinα) − α ≒( n − 1) α
◦In BK7, 0.52 times the angle of the wedge, and in synthetic fused silica, 0.46 times the angle of the wedge. (Visible range, normal incidence)
More Information
Name Wedged Substrate BK7 50mm Diameter 2 Degree Wedge Angle λ/10
Weight 0.0400kgs
Standard Coatings Available No
Guide
  • An arrow mark on the thicker side of the edge indicates front surface of the substrate.
  • It is also available beam sampler (BS4) coated with anti-reflection coating on the back.
  • WEB Reference Catalog Code/W3025
  • It is also available fabrication of the wedged substrates with a requested coating.
Remark -
Attention
  • Wedged substrates are not coated on both sides. There is a 3.5 to 4% reflection of the surface of the glass.
  • If the wedged substrate is inserted in the optical path of the laser beam, the transmitted beam is inclined slightly causing the refraction.
Image Label Wedged Substrate BK7 50mm Diameter 2 Degree Wedge Angle λ/10
Diameter φD 50mm
Material BK7
Material BK7
Diameter φD φ50mm
Thickness t 8mm
Surface Flatness λ/10
Wedge angle 2°±5′
Surface Quality (Scratch-Dig) 10−5
In stock
SKU
WSB-50C08-10-2
$255.00

Delivery in : 6-12 weeks

Wedged substrates can separate the reflected beam by the front and back surface of the substrates by the slight wedge angle. They can be used as a reference test plate for interferometers and beam samplers.

Resources & Downloads