Super Mirror 30mm Diameter 532nm Wavelength

TFHSM-30C06-532

The Fabry-Perot type resonator cavity is often used for measuring extremely high accuracy time or distance with use of the light. Super mirror is a ultra-high performance mirror that surface reflectance is close to 1 (100%) as much as possible in order to increase the performance of the resonator.
◦By using an ion beam sputtering (IBS), high quality and dense coating with few defects has been coated.
◦With a special polishing technique, the low-scattering substrate of surface flatness Ra<0.1nm is used.
◦The mirror coating with reflectivity of 99.999% is achieved from the coating design technology that had been developed for many years.
◦Scattering loss due to the substrate and the coating is very small, when it is incorporated into a cavity, it is to be expected a high finesse and very narrow spectral bandwidth.
◦It is provided two types of wavelength 532nm and 1064nm.
More Information
Name Super Mirror 30mm Diameter 532nm Wavelength
Weight 0.0100kgs
Standard Coatings Available No
Guide
  • The super mirror coated on a concave substrate is available as custom. Please specify the radius of curvature.
  • For products with different wavelengths, sizes, and incident angles not listed on-line or in our catalog, contact our Sales Division with your request.
  • Please refer to here for "Wavelength Characteristic Data (Reference Data, Transmittance: T[%]) " for each wavelength.
Remark -
Attention
  • When used as a single mirror, it does not transmit the light because the reflectance is high. Please use it after assembled to precise cavity in order to use transmitted light.
  • Please make a measurement or handling of the mirror in the clean environment. The dirt, dust and gas contamination will cause a significant effect on the measured value.
  • If a cavity is consisted of two plane mirrors, the output light may become unstable. In order to realize the stable cavity, please change the mirror of one side or both into a concave mirror, and build a cavity.
  • The Super Mirror has an extremely long lead time manufacture and test resulting in longer delivery than simple products on-line and in our general catalog. Please consult our Sales Team in advance when ordering.
Design wavelength 532nm
Diameter φD 30mm
Reflectance 99.995% (The above is the reflectance measured in the CRD method.<br> However, there may vary depending on measurement conditions and measurement method.)
Material Synthetic Fused Silica
Coating Dielectric Multi-layer High-Reflection Coating
Incident Angle
Surface flatness λ/10
Parallelism <5″
Surface Quality (Scratch-Dig) 10−5
Clear Aperture 80% of the diameter
Reflectance of rear surface <0.15%
Wavelength Range 532nm
Diameter φD φ30mm
Thickness t 6mm
Reflectance 99.995% (The above is the reflectance measured in the CRD method.
However, there may vary depending on measurement conditions and measurement method.)
Loss 20ppm (The values indicated in “Loss” is only reference data.
These data will not be attached with the product.)
In stock
SKU
TFHSM-30C06-532
$1,208.00

Delivery in : 6-12 weeks

The Fabry-Perot type resonator cavity is often used for measuring extremely high accuracy time or distance with use of the light. Super mirror is a ultra-high performance mirror that surface reflectance is close to 1 (100%) as much as possible in order to increase the performance of the resonator.

Resources & Downloads