Wollaston Prism 30×23mm Wavelength Range 190 - 3500nm
WPPB-15-23SN
It is a prism for separating the incident beam into two linearly polarized beams with orthogonal polarizing direction. Used in the optical system of a phase-contrast microscope.
◦Outgoing beam is emitted with deviation. In this case, the emitted beams are in opposite directions depending on the orientation of polarization.
◦A single-layer anti-reflection coating has been applied on the surface of the Wollaston prism to proved higher transmittance.
◦A single-layer anti-reflection coating has been applied on the surface of the Wollaston prism to proved higher transmittance.
Name | Wollaston Prism 30×23mm Wavelength Range 190 - 3500nm |
---|---|
Weight | 0.0400kgs |
Standard Coatings Available | No |
Guide |
|
Remark | - |
Attention |
|
Image Label | Wollaston Prism 30×23mm Wavelength Range 190 - 3500nm |
Material | α-BBO , Calcite |
Transmitted wavefront distortion | λ/4 |
Coating | Both surfaces ; MgF2 single-layer antireflection coating |
Laser Damage Threshold | 0.3J/cm2 (Laser pulse width ; 10ns ) |
Surface Quality (Scratch-Dig) | 20-10 |
Wavelength Range | 190 - 3500nm |
Extinction ratio | <5×10-6 |
Separation angle (first Wavelength) | 27°(at 190nm) |
Separation angle (second Wavelength) | 16°(at 800nm) |
Separation angle (third Wavelength) | 17°(at 3500nm) |
φA | 15mm |
φD×L | 30×23mm |
In stock
SKU
WPPB-15-23SN
$1,502.00
It is a prism for separating the incident beam into two linearly polarized beams with orthogonal polarizing direction. Used in the optical system of a phase-contrast microscope.