Ultraviolet Achromat Mounted 300.9mm Focal Length

NUDL-50-300P

Skip to the beginning of the images gallery

These lenses contain elements which have different refractive indexes and produce a high degree of correction across a bandwidth of 200 - 400nm. They can be used as a laser focusing lens for broadband ultra-violet sources.

Details

◦NA 0.1 or below (ETL model NA 0.25) can be focused to the diffraction limit.
◦ No adhesive or heat absorption materials are used to produce these lenses and they show high resistance to ultra-violet light.
◦These are not achromatic corrective but offers correction on spherical and comatic aberration.

More Information

More Information
Name	Ultraviolet Achromat Mounted 300.9mm Focal Length
Weight	0.0940kgs
Standard Coatings Available	No
Guide	Products that are not listed in the table or in the catalog such as high pulse lasers or different wavelengths are available upon request, please contact our Sales Division. We can provide catalog and custom lenses in large volume to your specifications. For details on focal length of each wavelength, please see details on “wavelength characteristic of the focal length data” on “Technical Data”.
Remark	-
Attention	These focusing lenses are made for use to image an object located in an infinitive distance or using a point of source as a parallel light. The correct direction to input a parallel light is the side with barrel lettering. If the direction is wrong, the spherical aberration will be increased and the image unfocused. If Focusing lens is used with the designed wavelength the spherical aberration and transmission will be poor. Usage with high power laser or near a high temperature light source, the high heat build-up in the lens may alter the focal length. To avoid this, heat prevention is required. To reduce the focus spot size, ensure that the input beam diameter (1/e²) is reduced to half of the effective diameter of the focus lens. These focusing lenses are not chromatic lenses; they are not optically corrected. The lenses have 3 to 4% of reflectivity per surface; therefore about 13% of loss is expected in transmission.
Image Label	Ultraviolet Achromat Mounted 300.9mm Focal Length
Focal length	300.9mm
Material	Synthetic fused silica for Excimer Laser − Calcium fluoride (CaF₂)
Material of frame	Aluminum (Finishing: Black anodized)
Design wavelength	200nm, 308nm, 400nm
Coating	Uncoated
Focal length f	300.9mm
Diameter φDc	54mm
Clear aperture φDe	47mm
Length L	22mm
Numerical aperture (NA)	0.08
Working distance (WD)	278.8mm

In stock

SKU

NUDL-50-300P

$1,778.00

Ultraviolet Achromat Mounted 300.9mm Focal Length

Resources & Downloads