High Power Laser Beam Expander 532nm 10X

BEHP-10-532

These laser beam expanders are designed for use with a high-power laser.
It supports a broader wavelength range than the current models.
It can be used in an optical system with high precision, such as a laser interferometer and processing by the lens design that takes into account the wavefront aberration.
◦The optical design of the beam expander is an air gap configuration that does not use an adhesive to bond the lenses. This allows the beam expander to be used with a high-power laser.
◦It is designed and coated to enable to use in a broader wavelength range than the current models.
◦By turning the diopter ring that is attached to the center of the beam expander, you can make variable beams such as the focused beam, collimated beam, and the divergent beam. It is used when you want to vary the position of the beam waist and if strict collimation adjustment is necessary.
More Information
Name High Power Laser Beam Expander 532nm 10X
Weight 0.4500kgs
Standard Coatings Available No
Guide
  • We also can provide a holder for our laser beam expander (KLH-BE) for the fine adjustment with tilt angle and to secure the beam expander. WEB Reference Catalog Code/W4147
Remark -
Attention
  • The laser energy density at small aperture(output aperture) will become higher than LIDT when reducing the beam diameter and the Beam expander might be broken.
  • It may not be able to obtain the expected function when the beam expander is used in the opposite direction (reducing the beam diameter). Please refer the technical note of he laser beam expander for details.
Design wavelength 532nm
Image Label High Power Laser Beam Expander 532nm 10X
Laser Damage Threshold 5J/cm<sup>2</sup>
Lens Material Synthetic fused silica
Configuration of lens 2 group 4plates Galilean
Acceptance angle ±1°
Coating Antireflection coating (Design wavelength: 633nm)
A range of the length of lens barrel ±5mm
Housing Material Aluminum
Design wavelength 532nm
Beam magnification 10×
Input Clear aperture φ3mm
Laser Damage Threshold <sup>*</sup> 5J/cm2
Weight 0.45kg
Availability Please contact
In stock
SKU
BEHP-10-532
$832.00

Delivery in : 6-12 weeks

These laser beam expanders are designed for use with a high-power laser.
It supports a broader wavelength range than the current models.
It can be used in an optical system with high precision, such as a laser interferometer and processing by the lens design that takes into account the wavefront aberration.

Resources & Downloads