3-Wavelengths Objective Lens(NPAL-50-UV-YSTF)

PFL-50-UV/NUV-AG-A

This objective lens can be used for laser machining using pulsed laser of SHG (532nm), THG (355nm), and FHG (266nm) YAG laser. Objective lense provides high transmittance at three harmonic wavelengths of YAG.
◦With its long working distance and corrected field curvature, its natural observation image is obtained to the periphery of viewing the field.
◦It is the long working infinity correction function that is used to introduce a laser system and coaxial observation.
◦It allows observation of the sample with visible light (400 – 500nm).
◦Laser Damage Threshold (Typical) 0.09 J/cm2 (266nm), 0.1J/cm2 (355nm), 0.2J/cm2 (532nm) (Laser pulse width 10ns, repetition frequency 20Hz)
More Information
Name 3-Wavelengths Objective Lens(NPAL-50-UV-YSTF)
Weight 0.4100kgs
Standard Coatings Available No
Guide
  • Available fixed objective lens holder (LHO-26).
  • WEB Reference Catalog Code/W4024
  • When the objective lens is fixed to a 2 axis holder, please consult our Sales Division.
  • For laser processing, we offer a dichroic block (DIMC WEB Reference Catalog Code/W2041) and for laser unit with coaxial illumination and observation (OUCI-2).
Remark -
Attention
  • When an objective lens is used in laser processing, use the diameter of the incident beam to extend to a size of half the pupil diameter (1/e2). A small light spot cannot be achieved when the incident beam is too narrow. Please note if there is a laser energy density increase, there will be a high possibility of damage to the objective lens.
  • The surface of an objective lens can be contaminated by debris during processing. To avoid this, please have sufficient working distance (WD) and insert a thin protective glass on the objective.
  • Magnification is the value when using the imaging lens f=200mm. When used in a microscope lens barrel from other manufacturers there may be different magnifications. The actual magnification should be calculated from the ratio of the focal length of the objective lens and the focal length of the imaging lens to verify the focal length of the imaging lens barrel to be used.
Image Label 3-Wavelengths Objective Lens(NPAL-50-UV-YSTF)
Focal length 4mm
Magnification 50×
Numerical Aperture 0.42
Working Distance WD 10.0mm
Item name Mplan UV/NUV 50x
Resolution (λ=550nm) 0.65μm
Focal depth (λ=550nm) ±1.6μm
Pupil diameter φ3.4mm
Real field of View (Eyepiece φ24mm) φ0.48mm
Real field of View (Imaging device 1/2-inch) 0.10×0.13mm
Weight 0.41kg
In stock
SKU
PFL-50-UV/NUV-AG-A
$14,044.00

Delivery in : 6-12 weeks

This objective lens can be used for laser machining using pulsed laser of SHG (532nm), THG (355nm), and FHG (266nm) YAG laser. Objective lense provides high transmittance at three harmonic wavelengths of YAG.

Resources & Downloads