Near Ultra-violet with 0.7mm Thickness compensation Objective Lens 20mm Focal Length 10x Working Distance 30.72mm

PAL-10-NUV-LC07

Skip to the beginning of the images gallery

This objective lens can be used for laser machining using pulsed laser of THG (355nm) YAG laser. Chromatic aberration is suppressed in both the visible and UV laser wavelength, achieving a high transmittance.

Details

◦With its long working distance and field curvature corrected, its natural observation image is obtained to the periphery of the visual field.
◦With its long working infinity correction function; this objective lens can be used for a laser system and coaxial observation.
◦It is also used for the observation of near ultra-violet light.
◦This objective lens can be used with a pulse laser of visible light (532nm).
◦Laser Damage Threshold (Typical) 0.05J/cm² (355nm), 0.1J/cm² (532nm) (Laser pulse width 10ns, repetition frequency 20Hz)

More Information

More Information
Name	Near Ultra-violet with 0.7mm Thickness compensation Objective Lens 20mm Focal Length 10x Working Distance 30.72mm
Weight	0.2700kgs
Standard Coatings Available	No
Guide	Available fixed objective lens holder (LHO-26). WEB Reference Catalog Code/W4024 When the objective lens is fixed to a 2 axis holder, please consult our Sales Division. For laser processing, we offer a dichroic block (DIMC WEB Reference Catalog Code/W2041) and for laser unit with coaxial illumination and observation (OUCI-2).
Attention	When an objective lens is used in laser processing, use the diameter of the incident beam to extend to a size of half the pupil diameter (1/e²). A small light spot cannot be achieved when the incident beam is too narrow. Please note if there is a laser energy density increase, there will be a high possibility of damage to the objective lens. The surface of an objective lens can be contaminated by debris during processing. To avoid this, please have sufficient working distance (WD) and insert a thin protective glass on the objective. Magnification is the value when using the imaging lens f=200mm. When used in a microscope lens barrel from other manufacturers there may be different magnifications. The actual magnification should be calculated from the ratio of the focal length of the objective lens and the focal length of the imaging lens to verify the focal length of the imaging lens barrel to be used.
Focal length	20mm
Magnification	10×
Numerical Aperture	0.28
Working Distance WD	30.72mm
Focal length f	20mm
Resolution (λ=550nm)	1.0μm
Focal depth (λ=550nm)	±3.5μm
Pupil diameter	φ11.2mm
Real field of imaging device (1/2-inch)	0.48×0.64mm
Cover glass material	Synthetic Quartz
Weight	0.27kg

In stock

SKU

PAL-10-NUV-LC07

$4,079.00

Near Ultra-violet with 0.7mm Thickness compensation Objective Lens 20mm Focal Length 10x Working Distance 30.72mm

Resources & Downloads