120mm Diameter, Brass, Crossed-Roller Bearing Rotation Stage, 360 Deg Manual Rotation, +/-4 Deg Fine Adjustment, Micrometer Drive, M6 Threads
KSPB-1206MH-M6
×
![3d-simple-product](https://www.optosigma.com/pub/media/catalog/3d-simple-product.png)
Low profile rotation stages offer coarse rotation adjustment of 360° and fine adjustment (with either a micrometer head or fine-pitch screw).
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.
Name | 120mm Diameter, Brass, Crossed-Roller Bearing Rotation Stage, 360 Deg Manual Rotation, +/-4 Deg Fine Adjustment, Micrometer Drive, M6 Threads |
---|---|
Weight | 1.1000kgs |
Guide |
|
Attention | - |
Image Label | Rotation Stage Brass 120mm with Aperture 360 Degree Course Adjustment and 8 Degree Fine Micrometer Adjustment and Lockable with Metric M6 Holes |
Stage Size | φ120mm |
Rotation Range | Coarse:360° Fine:±4° |
Load Capacity | 196N (20.0kg) |
Mounting Thread | M6 |
Stage Size | φ120mm |
Rotation Range | Coarse:360° Fine:±4° |
Scale Readable Resolution | 5′ |
Micrometer Readable Resolution | about 31.8″ |
Guide Method | Crossed roller |
Primary Material | Brass |
Finish | Super black chrome |
Load Capacity | 196N(20.0kgf) |
Max. Moment Capacity | 7.8N・m |
Moment Stiffness | 0.1″/N・cm |
Parallelism | 50μm |
Eccentricity | 30μm |
Wobble | 20μm |
In stock
SKU
KSPB-1206MH-M6
$974.00
Low profile rotation stages offer coarse rotation adjustment of 360° and fine adjustment (with either a micrometer head or fine-pitch screw).
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.