Photodiode Power & Energy Sensors, for PEM-TS-4.3 Stand-alone Controller

PM-PhotoDiode-RS

Photodiode Power & Energy Sensors, for PEM-TS-4.3 Stand-alone Controller
In stock
SKU
PM-PhotoDiode-RS
The Opto Sigma PMP-RS photodiode sensors are designed for measuring power of laser or light sources in the UV, visible, and IR ranges. It can read power levels with 100nW resolution. PMP-RS photodiode sensors have a DB15 connector and are designed to be used with PEM-TS-4.3 Stand-alone controller.
custom product
Customize product
Filters
Enabled filters :
Remove all filters
Name Delivery Price Add to cart
i
50mW UV and Visible Photodiode Sensor, 9.5-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
PMP50-UVIS-9.5D
6-12 weeks
$1,331.00
Calibration Wavelength Range 200 - 1100 nm
Detector Type Silicon
Power Calibration Uncertainty +/- 5% at 200-400nm, +/-3% at 400-1000nm, +/-5% at 1000-1100nm
Maximum Power Density 20W/cm2
Power Resolution 0.1mW
Power Linearity +/-2%
Noise Equivalent Power (NEP) 0.01mW
Cooling Convection
Response Time (0-90%) 0.25s
Interface DB15
i
40mW IR Photodiode Sensor, 9.5-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
PMP50-IR-9.5D
6-12 weeks
$1,386.00
Cooling Convection
Power Resolution 0.01mW
Noise Equivalent Power (NEP) 0.1mW
Response Time (0-90%) 0.25s
Power Calibration Uncertainty +/- 7% at 800-1000nm, +/-3% at 1000-1650nm, +/-5% at 1650-1800nm
Power Linearity +/-2%
Maximum Power Density 10W/cm2
Detector Type Germanium
Interface DB15

You must be logged in to ask questions