3000W Broadband Thermal Sensor, 55-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller

PM3000-55D-SH

The Opto Sigma PM3000-55D-SH is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 3000W with 1W resolution. The PM3000-55D-SH operates with a simple connection to a USB port on a standard PC. No additional power supplies or controllers are required. Software to run the sensor is available as a free download. Click download button below.
-
More Information
Name 3000W Broadband Thermal Sensor, 55-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
Weight 4.2000kgs
Guide -
Attention -
Cooling Water
Max Intermitent Power 4500W
Power Resolution 1W
Noise Equivalent Power (NEP) 250mW
Response Time (0-90%) 5s
Power Calibration Uncertainty +/-5%
Power Linearity +/-2%
Type of Absorber SHC
Maximum Power Density 3600W/cm2 at 2000W
Max Energy Density 5ms pulse width: 115 J/cm2, <10us pulse width: 4 J/cm2, 10ns pulse width: 1 J/cm2
Interface DB15
In stock
SKU
PM3000-55D-SH
$2,279.00

Delivery in : 6-12 weeks

The Opto Sigma PM3000-55D-SH is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 3000W with 1W resolution. The PM3000-55D-SH operates with a simple connection to a USB port on a standard PC. No additional power supplies or controllers are required. Software to run the sensor is available as a free download. Click download button below.