1200W Broadband Thermal Sensor, 5 - 1500 J, 60-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller

PM1200-60D-SH

The Opto Sigma PM1200-60D-SH is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 1200W with 100uW resolution. The PM1200-60D-SH operates with a simple connection to a USB port on a standard PC. No additional power supplies or controllers are required. Software to run the sensor is available as a free download. Click download button below.
-
More Information
Name 1200W Broadband Thermal Sensor, 5 - 1500 J, 60-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
Weight 4.4000kgs
Guide -
Attention -
Cooling Forced Air
Max Intermitent Power TBD
Power Resolution 100mW
Noise Equivalent Power (NEP) 100mW
Response Time (0-90%) 6s
Power Calibration Uncertainty +/-3%
Power Linearity +/-1.5%
Energy Resolution 100mJ
Energy Calibration Uncertainty +/-5%
Type of Absorber SHC
Maximum Power Density 5000W/cm2 at 1000W
Max Energy Density 5ms pulse width: 115 J/cm2, <10us pulse width: 4 J/cm2, 10ns pulse width: 1 J/cm2
Interface DB15
In stock
SKU
PM1200-60D-SH
$3,639.00

Delivery in : 6-12 weeks

The Opto Sigma PM1200-60D-SH is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 1200W with 100uW resolution. The PM1200-60D-SH operates with a simple connection to a USB port on a standard PC. No additional power supplies or controllers are required. Software to run the sensor is available as a free download. Click download button below.