10W Broadband Thermal Sensor, 10 mJ - 15 J, 20-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
PM10-20D-HP
The Opto Sigma PM10-20D-HP is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 10W with 100uW resolution. The PM10-20D-HP has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.
◦Complete meter less model is very small and performs measurement and analysis with PC.
◦Display connecting model can be used with a lightweight touch screen display in a narrow environment where a PC cannot be installed.
◦Display connecting model can be used with a lightweight touch screen display in a narrow environment where a PC cannot be installed.
| Name | 10W Broadband Thermal Sensor, 10 mJ - 15 J, 20-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller |
|---|---|
| Weight | 0.3000kgs |
| Guide | - |
| Attention | - |
| Energy Range | 10 mJ - 15 J |
| Power Range | 10 mW - 10 W |
| Wavelength Range | 0.19 - 11µm |
| Aperture | 12mm |
| Cooling | Convection |
| Max Intermittent Power | 15W |
| Power Resolution | 100uW |
| Noise Equivalent Power (NEP) | 600uW |
| Response Time (0-90%) | 1s |
| Power Calibration Uncertainty | +/-3% |
| Power Linearity | +/-1% |
| Energy Resolution | 0.1mJ |
| Energy Calibration Uncertainty | +/-5% |
| Type of Absorber | HPB |
| Maximum Power Density | 18kW/cm2 |
| Max Energy Density | 5ms pulse width: 36 J/cm2, 10us pulse width: 1.2 J/cm2, 10ns pulse width: 0.3 J/cm2 |
| Interface | DB15 Conector, Compatible with PEM-TS-4.3 Controller |
In stock
SKU
PM10-20D-HP
$861.00
Customize product
The Opto Sigma PM10-20D-HP is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 10W with 100uW resolution. The PM10-20D-HP has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.
Resources & Downloads
Related Products
Check items to add to the cart or
