Laser Beam Expander for CO2 Laser 4X Magnification

BE-10600-4A

This is a beam expander for CO2 Laser (wavelength : 10.6μm) made of zinc selenide (ZnSe) lens. It will be used in laser marking system and so on.
◦Diopter correction function is provided, customer can fine-tune the collimated beam.
◦Because it is a beam expander type of the Galilean, it is compact and has good aberration characteristics.
◦Since the lens of zinc selenide has an anti-reflection coating, loss of light intensity is kept low.

Important: Treatment of ZnSe optics
ZnSe (Zinc selenide) is Poisonous and harmful substance classified as legal, depending on the specifications, the certificate of delivery may be required for acquisition of Poisonous and harmful substances. In addition, ZnSe Optics disposal after use is prohibited in general.
Lenses that are no longer needed, please return it to us.

However, we only take back products that we supplied. This policy noted is in Japan and other countries may differ in the treatment of ZnSe (Zinc selenide), please contact your local sales office.
More Information
Name Laser Beam Expander for CO2 Laser 4X Magnification
Weight 0.3500kgs
Standard Coatings Available No
Guide
  • Beam expanders other than for CO2 laser (10.6μm) are available.
  • WEB Reference Catalog Code/W3200
  • We provide the laser beam expander holders (KLH-BE) for optical axis adjustment of the laser beam expander.
  • WEB Reference Catalog Code/W4147
Remark -
Attention
  • It is not possible to obtain a decreased beam diameter by using the beam expander on the opposite side. Use it properly to obtain an adequate optical solution.
  • Make sure that the beam expander is well aligned with the laser light axis. If the beam expander is inclining, the output light will also be inclined.
Image Label Laser Beam Expander for CO2 Laser 4X Magnification
Magnification
Material Zinc selenide (ZnSe)
Design wavelength 10.6μm
Coating Dielectric multi-layer coating
Magnification
Input aperture (MAX) (1/e φ4mm
Output Clear aperture φ28mm
Diameter φA φ36mm
In stock
SKU
BE-10600-4A
$968.00

Delivery in : 6-12 weeks

This is a beam expander for CO2 Laser (wavelength : 10.6μm) made of zinc selenide (ZnSe) lens. It will be used in laser marking system and so on.

Resources & Downloads