Kinematic Mirror Holder Thin Inch for 50.8mm Mirror
MHGT-50.8-UU
A new design based on the Kinematic mirror holders (MHG) resulting in reduced prices. These holders are best for experiments using many simple mirror holders or for use in production devices.
◦A small footprint offers more adjustment space compared to the MHG series.
◦Mirrors are held are at three points along the side to distribute the stress on the mirror evenly.
◦The thin frame and setscrew mounting method insure that large clear apertures can be obtained with reflected or transmitted light.
◦Mirrors are held are at three points along the side to distribute the stress on the mirror evenly.
◦The thin frame and setscrew mounting method insure that large clear apertures can be obtained with reflected or transmitted light.
Name | Kinematic Mirror Holder Thin Inch for 50.8mm Mirror |
---|---|
Weight | 0.1200kgs |
Guide |
|
Attention |
|
Image Label | Kinematic Mirror Holder Thin Inch for 50.8mm Mirror |
Diameter | 50.8mm |
Mounting Thread | 8-32UNC |
Compatible Optics Diameter φA | φ50.8mm |
Compatible Optics Thickness | 5 - 9mm |
Though hole φB | φ47mm |
Number of Adjustment Axes | 2 points |
Adjustment Range /Tilt | ±3° |
Adjustment Range /Rotation | ±3° |
Resolution /Tilt | about 0.25°/rotation |
Resolution /Rotation | about 0.25°/rotation |
In stock
SKU
MHGT-50.8-UU
$73.00
A new design based on the Kinematic mirror holders (MHG) resulting in reduced prices. These holders are best for experiments using many simple mirror holders or for use in production devices.