25.4mm Clear Edge Mirror Mount, High-Resolution, Left-Side Open

MHM-25.4-L

3d-simple-product
MHM mounts have an open, c-shaped frame providing clear access to the edge of the mirror. A precision 100μm thread pitch (~250TPI) adjustment screw introduces high resolutions. It is thinner than MHG mounts.



More Information
Name 25.4mm Clear Edge Mirror Mount, High-Resolution, Left-Side Open
Weight 0.0640kgs
Guide
  • MHG-NL mirror holders can have locking mechanisms for adjustments screws. (WEB Reference Catalog Code/W4001)
  • These holders can be mounted on separate post holders or M6 threaded posts.
Attention
  • The threaded hole for posts is offset from the center of the mirror reflective surface. These holders can not be used for installation on an optical bench at 45 degrees incidence. Only mirrors without and offset can be used for this application (MHI). (WEB Reference Catalog Code/W4102)
  • The rotation center for fine adjustment is not along the center of the mirror reflective surface. If fine adjustment is required, please us gimbal mirror holders (MHAN). Gimbal mirror holders have fine adjustments along the center of the mirror reflective surface. (WEB Reference Catalog Code/W4010)
Image Label High Precision Kinematic Mirror Mounts
Angle Range ±3°
Diameter 25.4mm
Type Left-Side Open
Mounting Thread 8-32/M4 Thru
Compatible Optics Diameter φ25, φ25.4mm
Compatible Optics Thickness 3 - 5mm
45 ° incident crossbeam φ12.2mm (Optics condition; thickness 3 mm, refractive index 1.52)
Though hole φ22.4mm
Number of Adjustment Axes 2 points
Adjustment Range /Tilt ±3°
Adjustment Range /Rotation ±3°
Resolution /Tilt about 0.15°/rotation
Resolution /Rotation about 0.15°/rotation
In stock
SKU
MHM-25.4-L
$107.00

Delivery in : in stock

MHM mounts have an open, c-shaped frame providing clear access to the edge of the mirror. A precision 100μm thread pitch (~250TPI) adjustment screw introduces high resolutions. It is thinner than MHG mounts.

Resources & Downloads