12.7mm Clear Edge Mirror Mount, High-Resolution, Right-Side Open

MHM-12.7-R

3d-simple-product
MHM mounts have an open, c-shaped frame providing clear access to the edge of the mirror. A precision 100μm thread pitch (~250TPI) adjustment screw introduces high resolutions. It is thinner than MHG mounts.



More Information
Name 12.7mm Clear Edge Mirror Mount, High-Resolution, Right-Side Open
Weight 0.0110kgs
Guide
  • MHG-NL mirror holders can have locking mechanisms for adjustments screws. (WEB Reference Catalog Code/W4001)
  • These holders can be mounted on separate post holders or M6 threaded posts.
Attention
  • The threaded hole for posts is offset from the center of the mirror reflective surface. These holders can not be used for installation on an optical bench at 45 degrees incidence. Only mirrors without and offset can be used for this application (MHI). (WEB Reference Catalog Code/W4102)
  • The rotation center for fine adjustment is not along the center of the mirror reflective surface. If fine adjustment is required, please us gimbal mirror holders (MHAN). Gimbal mirror holders have fine adjustments along the center of the mirror reflective surface. (WEB Reference Catalog Code/W4010)
Image Label High Precision Kinematic Mirror Mounts
Angle Range ±3°
Diameter 12.7mm
Type Right-Side Open
Mounting Thread 8-32/M4 Thru
Compatible Optics Diameter φ12.7mm
Compatible Optics Thickness 2.5 - 4mm
45 ° incident crossbeam -
Though hole φ11.5mm
Number of Adjustment Axes 2 points
Adjustment Range /Tilt ±3°
Adjustment Range /Rotation ±3°
Resolution /Tilt about 0.3°/rotation
Resolution /Rotation about 0.3°/rotation
In stock
SKU
MHM-12.7-R
$97.00

Delivery in : 2 weeks

MHM mounts have an open, c-shaped frame providing clear access to the edge of the mirror. A precision 100μm thread pitch (~250TPI) adjustment screw introduces high resolutions. It is thinner than MHG mounts.

Resources & Downloads