Dielectric Plate Beamsplitter 25.4mm Diameter 1:3

PSM25-25.4C03-10-550

Plate-type beamsplitters are dielectric multi-layer coatings on a parallel plate or a wedge substrate. They are designed to divide beams at a reflected light (R) : transmission light (T) ratio of 1:2 or 1:3. The rear surface is coated with anti-reflection (AR).
◦The dielectric multi-layer films have virtually zero light absorption and very low light intensity loss. However, transmittance and reflectance may vary according to wavelength, polarization and incident angles. Some deviation of the transmission optical path or ghosting may occur. To prevent ghosting, use wedge beamsplitters.
More Information
Name Dielectric Plate Beamsplitter 25.4mm Diameter 1:3
Weight 0.0050kgs
Standard Coatings Available No
Guide
  • Please contact our Sales Division for customized products. (Customized on size, wavelength or R:T, etc.)
  • WEB Reference Catalog Code/W3802
  • For a guarantee in reflected wavefront error or transmitted wavefront error, please contact our Sales Division with your requests.
  • Wedged types are marked with an arrow on the side of the substrate indicating the thickest point of the wedge.
Remark -
Attention
  • The transmission curve on the graph is based on actual measurements and may vary from different production lots.
  • Surface flatness is the reflected wavefront distortion of the surface prior to coating.
  • Compared to precision parallel plate type splitters, wedged substrate type beam splitters can prevent ghosting caused by rear surface reflection and significantly increase the displacement of the optical path.
  • Dielectric multi-layer coated beamsplitters sometimes do not function effectively in specified R:T ratios. If this should occur, first check the polarization characteristics of the light source (laser). Do keep in mind that lasers used in the semiconductor field emit a linear polarized light.
  • Use only non-polarized light or circular polarized light as incident light for dielectric multi-layer coated beam splitters. Using polarized light may result in R:T ratios that vary according to polarization components.
Design wavelength 400 - 700nm
Image Label Dielectric Plate Beamsplitter 25.4mm Diameter 1:3
Diameter φD 25.4mm
Material BK7
Surface flatness λ/10
Coating Front surface ; Dielectric multilayer coating
Rear surfaces ; Multilayer antireflection coating
Wavelength Range 400 - 700nm
Incident angle 45°
Laser Damage Threshold 2.1J/cm2 (Laser pulse width ; 10ns , Repetition frequency ; 20Hz)
Surface Quality <br> (Scratch-Dig) 10−5
Reflectance : Transmittance 1:3
Diameter φD φ25.4mm
Thickness t 3mm
Parallelism <5″
Transmittance at 550nm <sup>*</sup> 75±3%
Transmittance at 400・700nm <sup>*</sup> <90%
Availability Please contact
In stock
SKU
PSM25-25.4C03-10-550
$250.00

Delivery in : 6-12 weeks

Plate-type beamsplitters are dielectric multi-layer coatings on a parallel plate or a wedge substrate. They are designed to divide beams at a reflected light (R) : transmission light (T) ratio of 1:2 or 1:3. The rear surface is coated with anti-reflection (AR).

Resources & Downloads