Biconcave Lens 30mm Diameter −49.7mm Focal Length 750 - 1550nm
SLB-30B-50NIR2
These biconcave lenses are used when a very high negative power is required. They can be used in a multi-element system or alone to produce a diverging cone or virtual image. Sharpe edges, which are common in negative lenses, are removed by beveling to reduce the likelihood of chipping.
◦There are two types of biconvex lenses available; BK7 for use in visible range to infrared wavelength range.
◦Our lenses are listed by outside diameter and focal length to assist your selection according to required specifications.
◦Our lenses are listed by outside diameter and focal length to assist your selection according to required specifications.
Name | Biconcave Lens 30mm Diameter −49.7mm Focal Length 750 - 1550nm |
---|---|
Weight | 0.0500kgs |
Standard Coatings Available | No |
Guide |
|
Remark | - |
Attention |
|
Diameter φD | 30mm |
Focal length | −49.7mm |
Material | BK7 |
Design Wavelength | 546.1nm |
Refractive index n<sub>e</sub> | 1.519 |
Coating | Broadband Multilayer antireflection coating (750 - 1550nm) |
Transmmittance | > Average 98.5% |
Laser Damage Threshold | 4J/cm2 (Laser pulse width ; 10ns , Repetition frequency ; 20Hz) |
Clear aperture | 85% of the diameter |
Surface Quality (Scratch-Dig) | 20-10 |
Wavelength range of Antireflection Coating | 750 - 1550nm |
Diameter φD | φ30mm |
Focal length f | −49.7mm |
Edge thickness te | 6.4mm |
Center thickness tc | 2mm |
Back focal length fb | −50.3mm |
Radius of curvature r | 51.9mm |
Centration | <1′ |
In stock
SKU
SLB-30B-50NIR2
$112.00
These biconcave lenses are used when a very high negative power is required. They can be used in a multi-element system or alone to produce a diverging cone or virtual image. Sharpe edges, which are common in negative lenses, are removed by beveling to reduce the likelihood of chipping.