90mm Diameter, Brass, Crossed-Roller Bearing Rotation Stage, 360 Deg Manual Rotation, +/-5 Deg Fine Adjustment, Micrometer Drive, M6 Threads
KSPB-906M-M6
Low profile rotation stages offer coarse rotation adjustment of 360° and fine adjustment (with either a micrometer head or fine-pitch screw).
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.
◦Crossed roller bearing for high precision and high stiffness.
◦Vernier scales for reading angular position.
◦Center hole extends completely through stage.
◦Available with micrometers or fine pitch screws.
◦Vernier scales for reading angular position.
◦Center hole extends completely through stage.
◦Available with micrometers or fine pitch screws.
Name | 90mm Diameter, Brass, Crossed-Roller Bearing Rotation Stage, 360 Deg Manual Rotation, +/-5 Deg Fine Adjustment, Micrometer Drive, M6 Threads |
---|---|
Weight | 1.3000kgs |
Guide |
|
Attention | - |
Image Label | Rotation Stage Brass 90mm with 360 Degree Course Adjustment and 10 Degree Fine Micrometer Adjustment and Lockable with Metric M6 Holes |
Stage Size | φ90mm |
Rotation Range | Coarse:360° Fine:±5° |
Load Capacity | 147N (15.0kg) |
Mounting Thread | M6 |
Stage Size | φ90mm |
Rotation Range | Coarse:360° Fine:±5° |
Scale Readable Resolution | 5′ |
Micrometer Readable Resolution | about 41.25″ |
Guide Method | Crossed roller |
Primary Material | Brass |
Finish | Super black chrome |
Load Capacity | 147N(15.0kgf) |
Max. Moment Capacity | 5.0N・m |
Moment Stiffness | 0.2″/N・cm |
Parallelism | 50μm |
Eccentricity | 20μm |
Wobble | 20μm |
In stock
SKU
KSPB-906M-M6
$501.00
Low profile rotation stages offer coarse rotation adjustment of 360° and fine adjustment (with either a micrometer head or fine-pitch screw).
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.