65X65mm EXC Bearing, Steel, X-Axis Stage, Center Micrometer, +/-6.5mm, 1/4-20 Threads

More Information
Name	65X65mm EXC Bearing, Steel, X-Axis Stage, Center Micrometer, +/-6.5mm, 1/4-20 Threads
Weight	0.6000kgs
Guide	Vacuum-compatible stainless steel stages (TSDS-651) are also available. (WEB Reference Catalog Code/W7005) Bottom counter bore clearance holes are sized and spaced to accept both M6 or 1/4 size screws for mounting these stages down to a table. Both M6 or 1/4-20 inch tapped hole versions available. Both left and right hand adjustment versions available. Multiple actuator options available. Standard micrometer, submicronmicrometer, fine pitch screw. All stages are equipped with a robust knurled head locking screw.
Attention	Micrometer brackets may extend above the top surface of some stages. Check drawings for detailed information. Note that based upon payload size, rated travel could be reduced.
Image Label	Steel Extended Contact X Stage 65x65mm Size Center Drive Inch Threads
Stage Size	65×65mm
Travel	±6.5mm
Load Capacity	294N (30.0kg)
Mounting Thread	1/4-20UNC
Moment Stiffness / Pitch	0.08″/N・cm
Moment Stiffness / Yaw	0.08″/N・cm
Moment Stiffness / Roll	0.05″/N・cm
Guide Method	Extended Contact Ball Bearing Guide
Travel Accuracy / Pitch	25″
Travel Accuracy / Yaw	15″
Running Parallelism	7μm
Max. Moment Capacity / Pitch	13.2N・m
Max. Moment Capacity / Yaw	10N・m
Max. Moment Capacity / Roll	14.7N・m
Primary material	Steel
Finish	Super black chrome