600W Broadband Thermal Sensor, 1 - 800 J, 40-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
PM600-40D-HP
The Opto Sigma PM600-40D-HP is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 600W with 10uW resolution. The PM600-40D-HP has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.
-
Name | 600W Broadband Thermal Sensor, 1 - 800 J, 40-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller |
---|---|
Weight | 2.2000kgs |
Guide | - |
Attention | - |
Cooling | Forced Air |
Max Intermitent Power | 800W |
Power Resolution | 10mW |
Noise Equivalent Power (NEP) | 50mW |
Response Time (0-90%) | 5s |
Power Calibration Uncertainty | +/-3% |
Power Linearity | +/-1.5% |
Energy Resolution | 10mJ |
Energy Calibration Uncertainty | +/-5% |
Type of Absorber | HPB |
Maximum Power Density | 3000W/cm2 at 500W |
Max Energy Density | 5ms pulse width: 36 J/cm2, <10us pulse width: 12 J/cm2, 10ns pulse width: 0.3 J/cm2 |
Interface | USB |
In stock
SKU
PM600-40D-HP
$1,772.00
The Opto Sigma PM600-40D-HP is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 600W with 10uW resolution. The PM600-40D-HP has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.