6000W Broadband Thermal Sensor, 55-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
PM6000-55D-SH
The Opto Sigma PM6000-55D-SH is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 6000W with 1W resolution. The PM6000-55D-SH operates with a simple connection to a USB port on a standard PC. No additional power supplies or controllers are required. Software to run the sensor is available as a free download. Click download button below.
-
Name | 6000W Broadband Thermal Sensor, 55-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller |
---|---|
Weight | 4.2000kgs |
Guide | - |
Attention | - |
Cooling | Forced Air |
Max Intermitent Power | 9000W |
Power Resolution | 1W |
Noise Equivalent Power (NEP) | 500mW |
Response Time (0-90%) | 3.5s |
Power Calibration Uncertainty | +/-5% |
Power Linearity | +/-2% |
Type of Absorber | SHC |
Maximum Power Density | 4000W/cm2 at 5000W |
Max Energy Density | 5ms pulse width: 115 J/cm2, <10us pulse width: 4 J/cm2, 10ns pulse width: 1 J/cm2 |
Interface | DB15 |
In stock
SKU
PM6000-55D-SH
$3,162.00
The Opto Sigma PM6000-55D-SH is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 6000W with 1W resolution. The PM6000-55D-SH operates with a simple connection to a USB port on a standard PC. No additional power supplies or controllers are required. Software to run the sensor is available as a free download. Click download button below.