5W Broadband Thermal Sensor, 10 mJ - 5 J, 10-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
PM5-12D-BB
The Opto Sigma PM5-12D-BB is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 5W with 100uW resolution. The PM5-12D-BB has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.
-
| Name | 5W Broadband Thermal Sensor, 10 mJ - 5 J, 10-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller |
|---|---|
| Weight | 0.2000kgs |
| Guide | - |
| Attention | - |
| Energy Range | 10 mJ - 5 J |
| Power Range | 10 mW - 5 W |
| Wavelength Range | 0.19 - 25µm |
| Aperture | 10mm |
| Cooling | Convection |
| Max intermittent Power | 45W |
| Power Resolution | 100uW |
| Noise Equivalent Power (NEP) | 500uW |
| Response Time (0-90%) | 0.7s |
| Power Calibration Uncertainty | +/-3% |
| Power Linearity | +/-1% |
| Energy Resolution | 0.1mJ |
| Energy Calibration Uncertainty | +/-5% |
| Type of Absorber | BBF |
| Maximum Power Density | 200W/cm2 |
| Max Energy Density | 5ms pulse width: 3.6 J/cm2, 10us pulse width: 0.2 J/cm2, 10ns pulse width: 0.1 J/cm2 |
| Interface | DB15 Conector, Compatible with PEM-TS-4.3 Controller |
In stock
SKU
PM5-12D-BB
$809.00
Customize product
The Opto Sigma PM5-12D-BB is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 5W with 100uW resolution. The PM5-12D-BB has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.
Resources & Downloads
Related Products
Check items to add to the cart or
