50mm Travel, Z-Axis Stage, Built-In Controller, 120X120mm Platform, 1/4-20 Thread
SBIS26-50Z-INCH
No extra controller or driver is needed to operate these stages. That's because it is built into the stage itself, saving on space and wiring. Up to 99 SBIS stages can be connected together (Daisy Chained) and operated from a single computer. These stepping motor driven stages are ideal for positioning of measuring instrument or inspection tools for which high stiffness and high precision are required.
This motorized stage has a built-in 5-phase stepping motor driver and controller, saving on wiring and space, and can be controlled with simple commands. A maximum of 99 SBIS stages can be controlled by Daisy-Chain connection using our dedicated cables. The Z-axis type SBIS stages are equipped with a non-excitation electromagnetic brake as standard equipment. When the power is turned off, this break works to securely hold the load.
| Name | 50mm Travel, Z-Axis Stage, Built-In Controller, 120X120mm Platform, 1/4-20 Thread |
|---|---|
| Weight | 5.8500kgs |
| Guide | For the cable that connects SBIS stages together, please purchase separately HR10HR10P-RC-1 (with power cable) or HR10HR10-RC-1 (without power cable). Please purchase D9HR10-RC-2 separately for the cable that connects the host PC and SBIS. The interface is RS232C. For the power supply, please purchase the recommended AC adapter AC-ADP-2433 separately. Power can be supplied for up to 3 axes. After the 4th axis, an additional AC adapter is required for every 3 axes. A manual knob allows stage adjustment when the power is off. The following sample programs can be downloaded SG Sample or LabVIEW for 32/64-bit Windows |
| Travel | 50mm |
| Load Capacity | 39.2N (4.0kg) |
| Mounting Thread | 1/4-20UNC |
| Stage Size | 120x120mm |
| Feed Screw | Ball screw diameter 8mmx2mm lead |
| Positioning Slide | Outer rail structure |
| Stage Material | Aluminium |
| Finish | Black anodized |
| Resolution | 50nm/pulse at 80 divisions/step |
| Minimum/Maximum Driving speed | 1pps/800,000pps |
| MAX Speed | 10mm/sec |
| Positioning Accuracy | 30um |
| Positional Repeatability | 6um |
| Moment Stiffness / Pitch | 0.40arcmin./N-cm |
| Moment Stiffness / Yaw | 0.15arcmin./N-cm |
| Moment Stiffness / Roll | 0.2arcmin./N-cm |
| Lost Motion | 5um |
| Backlash | 3um |
| Verticality of motion | 50um |
| Pitch | 55arcsec |
| Yaw | 20arcsec |
| Sensor Part Number | Micro photo sensor : GP1S092HCPIF(Sharp Corporation) |
| Limit Sensor | Equipped (NORMAL CLOSE) |
| Origin Sensor | Equipped (NORMAL OPEN) |
| Proximity Origin Sensor | Equipped (NORMAL OPEN) |
| Drive Currernt | 0.75A/Phase |
| Motor Type | 5-phase stepping motor |
| Microstep Range (maximum number of divisions) | 1 to 250 divisions |
| Motor Step Angle | 0.72 Deg. |
| Maximum number of control axes | 99 axes |
| Manual drive knob | Provided |
| Operating Temperature Range | 5 to 40Deg. C |
In stock
SKU
SBIS26-50Z-INCH
$3,290.00
Customize product
No extra controller or driver is needed to operate these stages. That's because it is built into the stage itself, saving on space and wiring. Up to 99 SBIS stages can be connected together (Daisy Chained) and operated from a single computer. These stepping motor driven stages are ideal for positioning of measuring instrument or inspection tools for which high stiffness and high precision are required.
Related Products
Check items to add to the cart or
