25.4-mm, top adjust mirror mount, clear edge aperture, stainless steel, front-loading, 2 locking hex adjusters
MHV-25.4L-F
MHV-series mounts are all-stainless steel and made for standard 12.7-mm (0.5-in.), 25.4-mm (1-in.) mirrors. They feature adjustment screws that are accessable from the top of the mount (rather than the back) and a clear-edge aperture. The top-located screws allow for easy aligment and provide a level of laser safety by keeping your hand out of the beam path. The clear-edge aperture allows beams to be reflected at smaller incident angles so the beam path will take less space. The MHV mount is loaded with other useful features like front or rear mirror loading options, center-post mounting, adhesive wells, and keying pin slots. The design of the MHV family of mounts is currently registered with the US patent office as patent pending.
The design of the MHV family of mounts is currently registered with the US patent office. The status is patent pending.
| Name | 25.4-mm, top adjust mirror mount, clear edge aperture, stainless steel, front-loading, 2 locking hex adjusters |
|---|---|
| Weight | 0.1600kgs |
| Attention | Patent pending design. |
| Optic Loading Side | Front Loading |
| Angle Range | ±2° |
| Material | Stainless Steel |
| Number of Control Axes | 2 Axes |
| Optic Diameter | φ25.4mm |
| Type | Left-Side Open |
| Mount Material | Stainless Steel |
| Compatible Optics Diameter | 25, 25.4mm |
| Compatible Optics Thickness | 3 - 7mm |
| Mirror Loading | Front |
| Mirror Clamping Mechanism | Set Screw with Torsion Barrier, 2-mm (5/64-in.) Hex Key |
| Recommended Mirror Clamping Torque | 0.07 +/-0.01 Nm (10+/-2 oz.-in.) |
| Number of Adjustment Axes | 2 points |
| Angular Travel Range | +/-2 deg. |
| Adjuster Thread | M4 x 0.250mm(~100 TPI) |
| Dowel Pin Keys | 2mm Slot and Hole |
| Standard Mounting | Clearance holes for M4 / 8-32 screws |
| Post Mounting | M4 and 8-32 threaded holes |
In stock
SKU
MHV-25.4L-F
$248.00
Customize product
MHV-series mounts are all-stainless steel and made for standard 12.7-mm (0.5-in.), 25.4-mm (1-in.) mirrors. They feature adjustment screws that are accessable from the top of the mount (rather than the back) and a clear-edge aperture. The top-located screws allow for easy aligment and provide a level of laser safety by keeping your hand out of the beam path. The clear-edge aperture allows beams to be reflected at smaller incident angles so the beam path will take less space. The MHV mount is loaded with other useful features like front or rear mirror loading options, center-post mounting, adhesive wells, and keying pin slots. The design of the MHV family of mounts is currently registered with the US patent office as patent pending.
Related Products
Check items to add to the cart or
