200W Broadband Thermal Sensor, 200 mJ - 200 J, 25-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
PM200-25D-HP
The Opto Sigma PM200-25D-HP is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 200W with 10mW resolution. The PM200-25D-HP has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.
-
Name | 200W Broadband Thermal Sensor, 200 mJ - 200 J, 25-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller |
---|---|
Weight | 0.9000kgs |
Guide | - |
Attention | - |
Energy Range | 200 mJ - 200 J |
Power Range | 150 mW - 200W |
Wavelength Range | 0.19 - 11µm |
Aperture | 25mm |
Cooling | Forced Air with Fan |
Max Intermitent Power | 250W |
Power Resolution | 10mW |
Noise Equivalent Power (NEP) | 10mW |
Response Time (0-90%) | 1.7s |
Power Calibration Uncertainty | +/-3% |
Power Linearity | +/-1% |
Energy Resolution | 10mJ |
Energy Calibration Uncertainty | +/-5% |
Type of Absorber | HPB |
Maximum Power Density | 4kW/cm2 |
Max Energy Density | 5ms pulse width: 36 J/cm2, 10us pulse width: 1.2 J/cm2, 10ns pulse width: 0.3 J/cm2 |
Interface | DB15 Conector, Compatible with PEM-TS-4.3 Controller |
In stock
SKU
PM200-25D-HP
$1,139.00
The Opto Sigma PM200-25D-HP is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 200W with 10mW resolution. The PM200-25D-HP has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.