13mm Travel Piezomotor Actuator, 20nm Resolution, 2.9kg load, Flat Tip
PDM-13ACT
Our piezomotor actuators are compact and provide extremely high-resolution incremental movement, as low as 20nm. The motion of these actuators relies on the structured, high-speed "vibration" of a piezo stack along with the force difference between the friction of a moving object vs. friction of a non-moving object. Recall that that friction on a non-moving object is higher than moving friction. In the motion process, the piezo is expanded slowly, enabiling higher static friction, and this makes the screw rotate in a direction. Then, the piezo is is retracted very quickly, for lower static friction such that the screw does not rotate. Applying this process repeatedly at a high rate causes the actuator screw to rotate continuously in a particular direction. Simply reversing the order of the fast and slow piezo expansion/retraction reverses the direction of rotation, allowing the screw to move in the opposite direction. One of the key benefits of piezomotor actuation is that the static friction, which is in effect when the piezomotor is not operating, also acts like a locking mechanism. Our PDM peizo actuators are available in two travel ranges, 13- and 6.5-mm and have industry-standard 9.5-mm and 6-mm diameter mounting interfaces allowing them to be drop-in replecements for standard micrometers. They also have either ball-tip or flat-tip options. Another convenitent feature of these actuators is that the electrical cable (which is included) is removable from the actuator. Please note that these actuators do not have intermal feedback and therefore are open-loop. Vacuum compatible versions are also available. If your application needs different specification we can customize our piezomotor actuators to your unique requirements.
◦Two types of mounting shank diameters, a standard type of 9.5 mm diameter and a small type of 6 mm diameter, are available.
| Name | 13mm Travel Piezomotor Actuator, 20nm Resolution, 2.9kg load, Flat Tip |
|---|---|
| Weight | 0.0500kgs |
| Guide | ▶The piezo drive controller (PDM-ID-02) is required to operate the motor. The piezo drive motor is supplied with a 2m long cable for the dedicated piezo drive controller. |
| Attention |
▶This product is driven by inertia using piezoelectric elements, so there is no precision in positioning, etc. In addition, the speed and minimum travel may vary depending on individual differences and the direction of the actuator's feed. ▶If you wish to combine with your own manual stage, please contact us for a separate consultation. . ▶If you purchase the stage and angled micrometer heads together, we assemble them and deliver to you. Please contact sales in advance. Depending on the specifications of the combination, additional work or modifications may be required. Please contact our sales. |
| Travel | 0 - 13mm |
| Travel | >13mm (Max. 18mm) |
| Minimum travel | <20nm |
| Thrust Force | 29.4N |
| (MAX) Travel | 1.5mm/min |
| Weight | 0.05kg |
| Mounting Shank Diameter | 9.5mm |
| Operating Temperture Range | 10-30 C |
| Compatible Controller | PDM-ID-02 (Operates Two PDM Actuators) |
In stock
SKU
PDM-13ACT
$721.00
Customize product
Our piezomotor actuators are compact and provide extremely high-resolution incremental movement, as low as 20nm. The motion of these actuators relies on the structured, high-speed "vibration" of a piezo stack along with the force difference between the friction of a moving object vs. friction of a non-moving object. Recall that that friction on a non-moving object is higher than moving friction. In the motion process, the piezo is expanded slowly, enabiling higher static friction, and this makes the screw rotate in a direction. Then, the piezo is is retracted very quickly, for lower static friction such that the screw does not rotate. Applying this process repeatedly at a high rate causes the actuator screw to rotate continuously in a particular direction. Simply reversing the order of the fast and slow piezo expansion/retraction reverses the direction of rotation, allowing the screw to move in the opposite direction. One of the key benefits of piezomotor actuation is that the static friction, which is in effect when the piezomotor is not operating, also acts like a locking mechanism. Our PDM peizo actuators are available in two travel ranges, 13- and 6.5-mm and have industry-standard 9.5-mm and 6-mm diameter mounting interfaces allowing them to be drop-in replecements for standard micrometers. They also have either ball-tip or flat-tip options. Another convenitent feature of these actuators is that the electrical cable (which is included) is removable from the actuator. Please note that these actuators do not have intermal feedback and therefore are open-loop. Vacuum compatible versions are also available. If your application needs different specification we can customize our piezomotor actuators to your unique requirements.
Related Products
Check items to add to the cart or
