10W Broadband Thermal Sensor, 10 mJ - 15 J, 20-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller

PM10-20D-HP

The Opto Sigma PM10-20D-HP is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 10W with 100uW resolution. The PM10-20D-HP has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.
◦Complete meter less model is very small and performs measurement and analysis with PC.
◦Display connecting model can be used with a lightweight touch screen display in a narrow environment where a PC cannot be installed.
More Information
Name 10W Broadband Thermal Sensor, 10 mJ - 15 J, 20-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
Weight 0.3000kgs
Guide -
Attention -
Energy Range 10 mJ - 15 J
Power Range 10 mW - 10 W
Wavelength Range 0.19 - 11µm
Aperture 12mm
Cooling Convection
Max Intermittent Power 15W
Power Resolution 100uW
Noise Equivalent Power (NEP) 600uW
Response Time (0-90%) 1s
Power Calibration Uncertainty +/-3%
Power Linearity +/-1%
Energy Resolution 0.1mJ
Energy Calibration Uncertainty +/-5%
Type of Absorber HPB
Maximum Power Density 18kW/cm2
Max Energy Density 5ms pulse width: 36 J/cm2, 10us pulse width: 1.2 J/cm2, 10ns pulse width: 0.3 J/cm2
Interface DB15 Conector, Compatible with PEM-TS-4.3 Controller
In stock
SKU
PM10-20D-HP
$861.00

Delivery in : 2-3 weeks

The Opto Sigma PM10-20D-HP is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 10W with 100uW resolution. The PM10-20D-HP has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.

Resources & Downloads