Topmike Vertical Control Mirror Holder for 50mm with Micrometers

LMHB-50M

3d-simple-product
Top adjustment of these mirror mounts allow for devices to be placed in close proximity with each other. The mount can be mounted so that the micrometers are facing upwards or horizontally with the correct baseplate.
◦The optical axis of the mount does not change with vertical or horizontal mounting.
◦Each baseplate will work with the mount vertically or horizontally.




More Information
Name Topmike Vertical Control Mirror Holder for 50mm with Micrometers
Weight 0.7500kgs
Guide
  • Vertical control gimbal mirror and beamsplitter holders (BSHL) of which rotation center of fine adjustment matches the center of the mirror reflective surface are also available.
  • WEB Reference Catalog Code/W4012
Attention
  • LMHBP plates are required to install the mount onto an optical table.
  • Beamsplitters will have the transmitted beam partially blocked at 45 degrees incident. MHG or MHAN mounts are commended for beamsplitters.
  • WEB Reference Catalog Code/W4001, WEB Reference Catalog Code/W4010
Compatible Optics Diameter φ50mm
Compatible Optics Thickness 2 - 16mm
Adjustment Range /Tilt ±1.8°
Adjustment Range /Rotation ±1.8°
Resolution /Tilt about 0.004°/rotation
Resolution /Rotation about 0.004°/rotation
Coarse Resolution /Tilt -
Coarse Resolution /Rotation -
Fine Adjustment Range /Tilt -
Fine Adjustment Range /Rotation -
Fine Adjuster Indicator Conversion /Tilt -
Fine Adjuster Indicator Conversion /Rotation -
In stock
SKU
LMHB-50M
£329.30

Delivery in : 3-5 days

Top adjustment of these mirror mounts allow for devices to be placed in close proximity with each other. The mount can be mounted so that the micrometers are facing upwards or horizontally with the correct baseplate.

Resources & Downloads

We detect that you are accessing the website from a different region. You will be redirected to a local version of OptoSigma.

Your requested the page :

UNITED KINGDOM

Redirection to :