Skip to the beginning of the images gallery New Vacuum Pump
DA-20D
This is a vacuum pump that conducts vacuum exhaust through the reciprocating motion of a rubber thin film (diaphragm). Its simple structure makes it easy to handle.
Name | Skip to the beginning of the images gallery New Vacuum Pump |
---|---|
Weight | 7.2000kgs |
Guide | If you wish to use this product outside of Japan, please contact us separately. |
Attention | If the pump is stopped during load operation and immediately restarted afterwards, it may not restart. In this case, return the inside of the pump to atmospheric pressure. Do not suction corrosive gases, organic solvents, liquids, or condensable gases (water vapor, etc.). Do not allow dust, dirt, etc. to enter the pump. This vacuum pump is designed for indoor use only. Do not install the pump outdoors or in a location where it will be exposed to rain or water. Prolonged operation near atmospheric pressure may cause the pump to malfunction in a short period of time. |
Pumping Speed | 20L/min(50Hz), 24L/min(60Hz) |
Maximum Pressure | 5.33×103Pa (-96.0kPa*) |
Electric motor | Single phase, 100V, 60W, 4P, Capacitor operation |
Full-load current | 1.6A |
nlet, Outlet port diameter | O.D.φ9mm × I.D.φ5mm(Rc1/4) |
Ambient temperature | 7~40℃ |
Overall dimensions | 118(W)×242(L)×178(H)mm |
Out of stock
SKU
DA-20D
This is a vacuum pump that conducts vacuum exhaust through the reciprocating motion of a rubber thin film (diaphragm). Its simple structure makes it easy to handle.