Near Infrared Achromatic Lens 15mm Diameter 50.2mm Focal Length

DL-15-50PNIR

Skip to the beginning of the images gallery

By bonding two lenses with wavelength dispersion of different refractive index the resulting component will provide reduced spherical aberration and chromatic aberration than that of a single spherical lens. These achromatic lenses can be used as a focusing lens for YAG laser (1064nm) or LD of the near-infrared.

Details

◦The lens design is optimized so that the focal length change is minimized in the near infrared region. The focal length matches at 700nm, 880nm, 1100nm wavelengths and is optimized to minimize aberrations.
◦It is suitable as a collimating lens not only because chromatic aberration but also spherical aberration is collected.

More Information

More Information
Name	Near Infrared Achromatic Lens 15mm Diameter 50.2mm Focal Length
Weight	0.0050kgs
Standard Coatings Available	No
Guide	For product other diameter size or focal lengths which are not listed on our website or in our catalog, please contact our Sales Division with your requests. The design and manufacture of achromatic lens of other wavelength bands are available upon requested. Focusing Lenses for Fiber Lasers (HFTLSQ/HFDLSQ) are also available. WEB Reference Catalog Code/W3080
Remark	-
Attention	Please use achromatic lens when focusing an image at infinity or when making parallel light from the one point of light source. It does not provide sufficient optical performance when used in such as short-range distance imaging. There is a direction to the incident light parallel to the achromatic lens. A surface with a small radius of curvature is allowed to be incident parallel light from a rear surface (the surface the arrow is pointing to). When it is incident parallel light from the opposite side, spherical aberration and chromatic aberration will occur and the focused spot size will increase. When used in the visible region, spherical aberration and chromatic aberration increases. In addition, the transmittance decreases.
Image Label	Near Infrared Achromatic Lens 15mm Diameter 50.2mm Focal Length
Diameter φD	15mm
Focal length	50.2mm
Material	N-LAK22, SF6
Design wavelength	700nm, 880nm, 1100nm
Coating	Multi-layer anti-reflection coating (700 – 1550nm)
Cement	Ultraviolet Hardened Adhesive
Laser Damage Threshold	0.3J/cm²
Surface Quality (Scratch-Dig)	40-20
Diameter φD	φ15mm
Focal length f	50.2mm
Edge thickness te	4.9mm
Center thickness tc	5.9mm
Back focal length fb	46.8mm
Centration	＜3′

In stock

SKU

DL-15-50PNIR

£98.17

Near Infrared Achromatic Lens 15mm Diameter 50.2mm Focal Length

Resources & Downloads