Motorized 40X40mm EXC Bearing, Steel, Z-Axis Stage, (Horizontal Platform/Base) Center Piezomotor, +/-2.5mm, M3 Threads

More Information
Name	Motorized 40X40mm EXC Bearing, Steel, Z-Axis Stage, (Horizontal Platform/Base) Center Piezomotor, +/-2.5mm, M3 Threads
Weight	0.2500kgs
Remark	The cable used to connect the piezomotor actuator to a controller, like the PDM-ID-02 or the PAM-104, is included with the stage.
Attention	This translation stage type is not suitable for inverted use. In this condition, all load would be pulling against the spring. The stated load capacity is only for the implied orientation of travel, e.g. x-axis stages are specified for horizontal orientation. Regarding 25x25 and 40x40mm size stages, please do not apply heavy load toward the rotating (yawing) direction, as it may damage the stage. These stages use a pivot mechanism to transfer horizontal motion to vertical motion. This mechanism induces a small non-linearity between the distance the micrometer moves and the distance the stage platform moves. Contact our Sales Division for more information.
Stage Size	40×40mm
Mounting Thread	M3
Moment Stiffness / Pitch	0.3″/N・cm
Moment Stiffness / Yaw	0.23″/N・cm
Moment Stiffness / Roll	0.2″/N・cm
Guide Method	Extended Contact Ball Bearing Guide
Travel Accuracy / Pitch	25″
Travel Accuracy / Yaw	15″
Travel Accuracy / Straightness	0.5μm
Running Parallelism	7μm
Max. Moment Capacity / Pitch	7.8N・m
Max. Moment Capacity / Yaw	5.0N・m
Max. Moment Capacity / Roll	7.8N・m
Primary material	Steel
Finish	Super black chrome