90mm Diameter, Brass, Crossed-Roller Bearing Rotation Stage, 360 Deg Manual Rotation, +/-5 Deg Fine Adjustment, Micrometer Drive, M6 Threads

KSPB-906M-M6

Low profile rotation stages offer coarse rotation adjustment of 360° and fine adjustment (with either a micrometer head or fine-pitch screw).
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.
◦Crossed roller bearing for high precision and high stiffness.
◦Vernier scales for reading angular position.
◦Center hole extends completely through stage.
◦Available with micrometers or fine pitch screws.
More Information
Name 90mm Diameter, Brass, Crossed-Roller Bearing Rotation Stage, 360 Deg Manual Rotation, +/-5 Deg Fine Adjustment, Micrometer Drive, M6 Threads
Weight 1.3000kgs
Guide
  • The part number suffix F
  • Most stages can be directly mounted to corresponding sized linear stages for multiple axis adjustments.
  • Adapter plates are available for mounting other size stages and accessories.FP indicates products with fine-pitch screws instead of standard micrometers.
  • Fine Pitch screws have a screw pitch of 0.25mm and require a hex wrench or the optional hex wrench with knob (KCL) for adjustment.(WEB Reference Catalog Code/W8008-3)
Attention -
Image Label Rotation Stage Brass 90mm with 360 Degree Course Adjustment and 10 Degree Fine Micrometer Adjustment and Lockable with Metric M6 Holes
Stage Size φ90mm
Rotation Range Coarse:360° Fine:±5°
Load Capacity 147N (15.0kg)
Mounting Thread M6
Stage Size φ90mm
Rotation Range Coarse:360° Fine:±5°
Scale Readable Resolution 5′
Micrometer Readable Resolution about 41.25″
Guide Method Crossed roller
Primary Material Brass
Finish Super black chrome
Load Capacity 147N(15.0kgf)
Max. Moment Capacity 5.0N・m
Moment Stiffness 0.2″/N・cm
Parallelism 50μm
Eccentricity 20μm
Wobble 20μm
In stock
SKU
KSPB-906M-M6
£423.40

Delivery in : 1 week

Low profile rotation stages offer coarse rotation adjustment of 360° and fine adjustment (with either a micrometer head or fine-pitch screw).
Directly rotate the stage upper plate for coarse adjustment, then clamp the clutch screw and use micrometer head or fine-pitch screw (±5°) for fine adjustment.

We detect that you are accessing the website from a different region. You will be redirected to a local version of OptoSigma.

Your requested the page :

UNITED KINGDOM

Redirection to :