10W High-Energy-Density Thermal Sensor, 160 kW/sqcm, 10 mJ - 15 J, 12-mm Sensor Aperture, Broadband, used with PC thru USB Connection
PM10-12D-DF-USB
The Opto Sigma PM10-12D-DF-USB is a thermal sensor designed for measuring high-energy/power density laser or light sources. It can read power densities as high as 160 kW/sqcm with 10W maximum average power at 100 uW resolution. In energy mode, it can read up to 15 J with 100 ms pulse. The sensor head has a 12-mm aperture and operates in the 0.2-21 um broadband spectral range. The PM10-12D-DF-USB operates with a simple connection to a USB port on a standard PC. No additional power supplies or controllers are required. Software to run the sensor is available as a free download. Click download button below.
-
| Name | 10W High-Energy-Density Thermal Sensor, 160 kW/sqcm, 10 mJ - 15 J, 12-mm Sensor Aperture, Broadband, used with PC thru USB Connection |
|---|---|
| Weight | 0.2000kgs |
| Guide | - |
| Attention | - |
| Energy Range | 25 mJ - 15 J |
| Power Range | 10 mW - 10 W |
| Wavelength Range | 0.2 - 2.1µm |
| Aperture | 12mm |
| Cooling | Convection |
| Max Intermitent Power | 15W |
| Power Resolution | 10mW |
| Noise Equivalent Power (NEP) | 0.6mW |
| Response Time (0-90%) | 1.0s |
| Power Calibration Uncertainty | +/-3% |
| Power Linearity | +/-1% |
| Energy Resolution | 0.1mJ |
| Energy Calibration Uncertainty | +/-5% |
| Type of Absorber | DIF |
| Maximum Power Density | 160kW/cm2 |
| Max Energy Density | 5ms pulse width: 1200 J/cm2, 10us pulse width: 22 J/cm2, 10ns pulse width: 6.5 J/cm2 |
| Interface | USB |
In stock
SKU
PM10-12D-DF-USB
£1,597.30
Customize product
The Opto Sigma PM10-12D-DF-USB is a thermal sensor designed for measuring high-energy/power density laser or light sources. It can read power densities as high as 160 kW/sqcm with 10W maximum average power at 100 uW resolution. In energy mode, it can read up to 15 J with 100 ms pulse. The sensor head has a 12-mm aperture and operates in the 0.2-21 um broadband spectral range. The PM10-12D-DF-USB operates with a simple connection to a USB port on a standard PC. No additional power supplies or controllers are required. Software to run the sensor is available as a free download. Click download button below.
