Laser Line Mirror 25mm Diameter 5mm Thick 532nm Wavelength
TFM-25C05-532
These laser mirrors are designed for specific wavelength laser applications where low wavefront distortion, low scattering and high reflectivity are usually important. These narrowband reflectors are for several wavelengths and sizes.
◦Dielectric multi-layer coating does not have absorption like Aluminum coatings and provide higher than 99% reflectance except some mirrors for UV wavelength use are provide 95% reflectance.
◦These coatings are much harder and provide higher laser damage threshold than Al+MgF2 coating.
◦These coatings are much harder and provide higher laser damage threshold than Al+MgF2 coating.
| Name | Laser Line Mirror 25mm Diameter 5mm Thick 532nm Wavelength |
|---|---|
| Weight | 0.0070kgs |
| Standard Coatings Available | No |
| Guide |
|
| Remark | - |
| Attention |
|
| Design wavelength | 532nm |
| Diameter φD | 25mm |
| Reflectance | ＞99.5% |
| Material | BK7 |
| Coating | Dielectric multi-layer coating |
| Incident angle | 45°±3° |
| Surface flatness | λ/10 |
| Parallelism | ＜3′ |
| Surface Quality (Scratch-Dig) | 10−5 |
| Wavelength Range | 532nm |
| Diameter φD | φ25mm |
| Thickness t | 5mm |
| Reflectance | ＞99.5% |
| Laser Damage Threshold<sup>*</sup> | 8J/cm2 |
| Rear surface | Polished |
| Availability | From stock |
In stock
SKU
TFM-25C05-532
£102.90
Customize product
These laser mirrors are designed for specific wavelength laser applications where low wavefront distortion, low scattering and high reflectivity are usually important. These narrowband reflectors are for several wavelengths and sizes.
Resources & Downloads
Related Products
Check items to add to the cart or
