Kinematic Center Mirror Mount Inch for 30mm Mirror
MHI-30-UU
×
The Kinematic Center Mount is designed to allow the mirror to be loaded from the rear, keeping the reflective front surface centered above the mounting hole.
◦When this mount is rotated 45 degrees on an optical bench, the center of mirror will stay at the optical axis.
◦Cutouts and bevels allow these to be used as beamsplitter holders and not interfere with the transmitted beam.
◦Building the mirror frame into the support of the holder keeps the mount thin with a small footprint.
◦The small footprint allows more room to access the adjusters compared to regular kinematic mirror holders.
◦Includes alignment pin holes to accurately place mount in OEM instruments(φ3H7 except MHI-12.7, which is φ2H7).
◦Cutouts and bevels allow these to be used as beamsplitter holders and not interfere with the transmitted beam.
◦Building the mirror frame into the support of the holder keeps the mount thin with a small footprint.
◦The small footprint allows more room to access the adjusters compared to regular kinematic mirror holders.
◦Includes alignment pin holes to accurately place mount in OEM instruments(φ3H7 except MHI-12.7, which is φ2H7).
Name | Kinematic Center Mirror Mount Inch for 30mm Mirror |
---|---|
Weight | 0.1300kgs |
Guide |
|
Attention |
|
Image Label | Kinematic Center Mirror Mount Inch for 30mm Mirror |
Diameter | 30mm |
Compatible Optics Diameter | φ30mm |
Compatible Optics Thickness | 3 - 10mm |
Clear Aperture | φ27mm |
Reflected Clear Aperture<br> (45°Incidence) | φ18.3mm |
Transmitted Beam Clear Aperture<br> (45°Incidence) | φ15mm *When light is transmitted through a BK7 plane parallel substrate of 3mm thickness. |
Adjustment Range /Tilt | ±1.5° |
Adjustment Range /Rotation | ±1.5° |
Resolution /Tilt | about 0.35°/rotation |
Resolution /Rotation | about 0.35°/rotation |
In stock
SKU
MHI-30-UU
£109.80
The Kinematic Center Mount is designed to allow the mirror to be loaded from the rear, keeping the reflective front surface centered above the mounting hole.