Glan Taylor Prism 350 - 2300nm 6mm Aperture

GYPC-06-15SN

Skip to the beginning of the images gallery

The transmission loss is minimal, and a high extinction ratio below 5×10^-5 is obtained. The Calcite type that can be used in the visible to the infrared region, and α-BBO crystal type usable in the ultraviolet region are available. The polarizer provides a very short prism length.

Details

◦The two prisms are mounted with a small gap (air-gap) to eliminate the adhesive and reduce laser damage.
◦A single-layer anti-reflection coating has been applied on the surface of the polarizing prism to provide high transmittance.

More Information

More Information
Name	Glan Taylor Prism 350 - 2300nm 6mm Aperture
Weight	0.0070kgs
Standard Coatings Available	No
Guide	Glan laser prism for high-power laser (GLPB / GLP) and Wollaston prism (WPPB / WPPC) are also available. WEB Reference Catalog Code/W3451, WEB Reference Catalog Code/W3453 If you need uncoated Glan Thompson prism or anti-reflection coating with specific reflectance, please contact our Sales Division with your request.
Remark	-
Attention	A change in the incident angle may also changes the extinction ratio of the linearly polarized transmitted light. Light not transmitted through the Gran Taylor prism is absorbed and scattered in all side faces of the prism. In the high-precision measurement system, it is necessary to use pinhole to block light scattered in the side face of the prism. Because of natural calcite crystals, there are individual differences, and variations in quality.
Image Label	Glan Taylor Prism 350 - 2300nm 6mm Aperture
Material	α-BBO , Calcite
Angular deviation of beam	＜3′
Transmitted wavefront distortion	λ/4
Coating	Both surfaces ; MgF₂ single-layer antireflection coating
Laser Damage Threshold	1J/cm² (Laser pulse width ; 10ns )
Surface Quality (Scratch-Dig)	20-10
Wavelength Range	350 - 2300nm
Extinction ratio	＜5×10^-5
φA	φ6mm
φD×L	15×15mm

In stock

SKU

GYPC-06-15SN

£493.90

Glan Taylor Prism 350 - 2300nm 6mm Aperture

Resources & Downloads