Fixed Lens Holder
LHF-50.8S
A lens holder that can be used in two ways, Metric (M6) and Inch (1/4-20 UNC). It is convenient to use in an experiment where metrics and inch parts are mixed.
◦To set the optical axis height from the baseplate to round figures such as 55mm or 60mm, replace posts with post stands (PST-**).
WEB Reference Catalog Code/W6039
◦This item can firmly hold thin single lenses as well as thick lenses such as achromatic lenses.
◦Best suited when the holders are in close proximity and when setting up a optical system such as folded beam go through the right next to the lens holder because the outer diameter of the holder is small.
◦Resin retaining ring fix lenses securely without scratching them. (Resin ring is not attached.)
WEB Reference Catalog Code/W6039
◦This item can firmly hold thin single lenses as well as thick lenses such as achromatic lenses.
◦Best suited when the holders are in close proximity and when setting up a optical system such as folded beam go through the right next to the lens holder because the outer diameter of the holder is small.
◦Resin retaining ring fix lenses securely without scratching them. (Resin ring is not attached.)
| Name | Fixed Lens Holder |
|---|---|
| Weight | 0.5500kgs |
| Guide |
|
| Attention |
|
| Compatible Optics Diameter φA | φ50.8mm |
| Clear Aperture φB | φ47mm |
| C | M51.65 P0.75 |
| D | 35mm |
| E | 7mm |
| F | 18mm |
| φG | φ58mm |
| H | 71mm |
| I | 38.1mm |
| Compatible Optics Thickness | 2 - 13mm |
In stock
SKU
LHF-50.8S
£47.60
Customize product
A lens holder that can be used in two ways, Metric (M6) and Inch (1/4-20 UNC). It is convenient to use in an experiment where metrics and inch parts are mixed.
