fθ Lens for CO2 Laser

fθ-100-10600A

Skip to the beginning of the images gallery

The f theta lens for CO₂ laser is made by a single lens of zinc selenide (ZnSe). These are used in the laser marking systems.

Details

◦It is compact and lightweight because it is composed of a single lens.
◦The design and use are processed to an optimum shape of various aberrations becomes smaller.
◦There are wide variety of the lineup that scan area is 50mm to 300mm.

Important： Treatment of ZnSe optics
ZnSe (Zinc selenide) is Poisonous and harmful substance classified as legal, depending on the specifications, the certificate of delivery may be required for acquisition of Poisonous and harmful substances. In addition, ZnSe Optics disposal after use is prohibited in general.
Lenses that are no longer needed, please return it to us.
However, we only take back products that we supplied. This policy noted is in Japan and other countries may differ in the treatment of ZnSe (Zinc selenide), please contact your local sales office.

More Information

More Information
Name	fθ Lens for CO2 Laser
Weight	0.1300kgs
Standard Coatings Available	No
Guide	We also offer f theta lens in other than CO₂ laser wavelength of 10.6μm. WEB Reference Catalog Code/W3084
Remark	-
Attention	Hydrogen selenium is harmful when it comes to contact with strong acids! Do not immerse the lens in hydrochloric or sulphuric acid. When light is condensed on the surface of ZnSe, the high power laser beam may produce toxic gases due to the thermal decomposition. In addition, a large amount of gas and powder occurs when the ZnSe lens is damaged by the laser thermal runaway. In case of the ZnSe lens is damaged by any chance, DO NOT handle the lens with your bare hands. Collect the debris and be careful not to inhale the powder and steam generated. It is not recommended to use the f theta lens for the optical imaging system because it is designed for the scanning system. Please place in accordance with the position of the entrance pupil of the fθ lens beam scanning system (galvanometer mirror). If the incident pupil is not in position of the beam scanning system, the optimum focusing spot cannot be achieved because the aberration will increase.
Image Label	fθ Lens for CO2 Laser
Focal length	100mm
Material	Zinc selenide (ZnSe)
Design wavelength	10.6μm
Entrance pupil diameter	φ12mm
Distance to lens from pupil	25mm
Focal length f	100mm
Scanning angle	±21°
Scanning Range	71×71mm
Working distance (WD)	85.8mm

In stock

SKU

fθ-100-10600A

£1,037.10

The f theta lens for CO₂ laser is made by a single lens of zinc selenide (ZnSe). These are used in the laser marking systems.

fθ Lens for CO2 Laser

Resources & Downloads