Cage Clamping plate for Cube Joint
C16-CBCP
Cage Clamping plate for cube joint can be directly fixed with the Cube(C16-CB-H1.7) for 16mm Cage system. Cage Clamping plate has resin on top of the screw and the optical components can be held without damage.
◦ Mirror holders are supported by four (or three) rods (cages). In addition, the mirror holder can split the optical axis and the cage into two, or fold it to 90 degrees.
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system.
◦ The cage system has no distinction of up, down, left and right. Therefore, it is possible to place the holder in various orientations, which is convenient for constructing a three-dimensional optical system.
| Name | Cage Clamping plate for Cube Joint |
|---|---|
| Weight | 0.0100kgs |
| Guide |
|
| Attention |
|
| Primary material | Aluminum |
| Products Name | Cage Clamping plate for Cube Joint |
| Guide Rod Diameter (Spaceing between rod) | - |
| Thougth Hole Diameter | - |
| Guide Rod Mounting Surfaces | - |
| Distance to center | - |
| Compatible Optics Diameter | - |
| Clear Aperture | - |
| Compatible Mount | C16-CB-H12.7 |
| Compatiblefixing screw | - |
In stock
SKU
C16-CBCP
£25.30
Customize product
Cage Clamping plate for cube joint can be directly fixed with the Cube(C16-CB-H1.7) for 16mm Cage system. Cage Clamping plate has resin on top of the screw and the optical components can be held without damage.
