Broadband Polarizing Beamsplitter Cube 10mm 750 - 850nm
PBSW-10-800
Broadband Polarizing Beamsplitters provides wide band polarizing. Polarizing beamsplitters consist of two right angle prisms. One of them is coated with dielectric multi-layer polarizing coating on the hypotenuse face.
◦Polarizing beamsplitters split the light entering at zero degrees into p-polarization as transmitted and s-polarization as reflected.
◦Four surfaces of the cube are coated with multi-layer anti-reflection coatings.
◦For cube beamsplitters, unlike plate beamsplitters, beam deviations of transmitted beams and ghosts rarely occur.
◦Four surfaces of the cube are coated with multi-layer anti-reflection coatings.
◦For cube beamsplitters, unlike plate beamsplitters, beam deviations of transmitted beams and ghosts rarely occur.
Name | Broadband Polarizing Beamsplitter Cube 10mm 750 - 850nm |
---|---|
Weight | 0.0050kgs |
Standard Coatings Available | No |
Guide |
|
Remark | - |
Attention |
|
Design wavelength | 750 - 850nm |
Image Label | Broadband Polarizing Beamsplitter Cube 10mm 750 - 850nm |
Length | 10mm |
Material | BK7 |
Material | BK7 |
Surface flatness of substrate | λ/4 |
Angular deviation of transmitted beam | <10′ |
Coating |
Hypotenuse surface ; Dielectric multilayer coating Four surfaces ; Multilayer antireflection coating |
Incident angle | 0° |
Laser Damage Threshold | 0.3J/cm2 (Laser pulse width ; 10ns , Repetition frequency ; 20Hz) |
Surface Quality (Scratch-Dig) | 20-10 |
Wavelength range | 750 - 850nm |
A=B=C | 10mm |
Transmittance of P polarized light | >92% |
Reflectance of S polarized light | >97% |
Extinction ratio of transmission (Ts:Tp) | 1:200 |
In stock
SKU
PBSW-10-800
£260.60
Broadband Polarizing Beamsplitters provides wide band polarizing. Polarizing beamsplitters consist of two right angle prisms. One of them is coated with dielectric multi-layer polarizing coating on the hypotenuse face.