Beam SamplerWedged 50mm Diameter 400-700nm
BS4-50C08-10W-550
A beam sampler behaves like a plate beamsplitter, it has the ability to reflect approximately 5.2% of the total beam.
◦Uncoated surface of optical parallels or wedged substrates are used as reflection surfaces. The rear surfaces are coated with multi-layer anti-reflection.
◦These products have transmitted beam deviation and ghosting of the rear surface reflections due to the characteristics of plate beamsplitters.
◦Wedged beam samplers with AR coating on the rear surface should be selected to prevent ghosting.
◦These products have transmitted beam deviation and ghosting of the rear surface reflections due to the characteristics of plate beamsplitters.
◦Wedged beam samplers with AR coating on the rear surface should be selected to prevent ghosting.
| Name | Beam SamplerWedged 50mm Diameter 400-700nm |
|---|---|
| Weight | 0.0400kgs |
| Standard Coatings Available | No |
| Guide |
|
| Remark | - |
| Attention |
|
| Design wavelength | 400 - 700nm |
| Image Label | Beam SamplerWedged 50mm Diameter 400-700nm |
| Diameter φD | 50mm |
| Material | BK7 |
| Surface flatness | λ/10 |
| Coating |
Front surface ; Uncoated Rear surfaces ; Visble multilayer antireflection coating |
| Incident angle | 45° |
| Divergence ratio <br> (reflectance : transmittance) |
5 : 95 (The average value of the P-Polarization and the S-Polarization) |
| Laser Damage Threshold | 4J/cm2 (Laser pulse width ; 4ns , Repetition frequency ; 20Hz) |
| Surface Quality <br> (Scratch-Dig) | 10−5 |
| Wavelength range | 400 - 700nm |
| Diameter φD | φ50mm |
| Thickness t | 8mm |
| Wedge angle W | 1°±5′ |
In stock
SKU
BS4-50C08-10W-550
£199.80
Customize product
A beam sampler behaves like a plate beamsplitter, it has the ability to reflect approximately 5.2% of the total beam.
Resources & Downloads
Related Products
Check items to add to the cart or
