Adapter (M16) for Post-HolderPedestal (series RS and BRS)
PSTM-12.5-M16
Clamps for Pedestal Bases (PST) can secure Pedestals freely about a tapped hole on a vibration isolator or laboratory bench.
The PSTM is used to add a pedestal base to standard Post Holders with M16 Threads. This allows the Post Holders to be freely positioned like a Pedestal.
The PSTM is used to add a pedestal base to standard Post Holders with M16 Threads. This allows the Post Holders to be freely positioned like a Pedestal.
◦The PSC-10 product line must be used in pairs, for clamping a Pedestal at two positions. The PSCA/PSCS is used to clamp a pedestal at a single position.
◦The long slot on the PSCA /PSCS clamps allows for coarse adjustment in the horizontal direction.
◦The clamp is secured with a M6 or 1/4-20UNC screw.
◦The long slot on the PSCA /PSCS clamps allows for coarse adjustment in the horizontal direction.
◦The clamp is secured with a M6 or 1/4-20UNC screw.
Name | Adapter (M16) for Post-HolderPedestal (series RS and BRS) |
---|---|
Weight | 0.0450kgs |
Guide | - |
Attention | - |
Image Label | Pedestal Base M16 12.5mm height |
Quantity | 1 Piece |
Material | Stainless Steel |
Thread | M16 |
In stock
SKU
PSTM-12.5-M16
£9.40
Clamps for Pedestal Bases (PST) can secure Pedestals freely about a tapped hole on a vibration isolator or laboratory bench.
The PSTM is used to add a pedestal base to standard Post Holders with M16 Threads. This allows the Post Holders to be freely positioned like a Pedestal.
The PSTM is used to add a pedestal base to standard Post Holders with M16 Threads. This allows the Post Holders to be freely positioned like a Pedestal.