80mm Diameter Platform, Motorized Rotation Stages with Rotary Encoder, 2-Phase Stepper Motor, M6 Thread

OSMS(RE)-80YAW-M6-M2

CE
Based on our CE-compliant OSMS-YAW Series Rotation Motorized Stages, these models are equipped with a 2-phase stepping motor and rotary encoder. A rotary encoder built into the motor enables "Step-out detection" with a dedicated controller.
The product is equipped with a "2-phase bipolar stepping motor". Specifications are basically equivalent to those of OSMS-YAW Series Rotation Motorized Stages with 5-phase motors. The product body is the same for the METRIC and INCH type stages. METRIC and INCH types are available for mounting on the table for each size. The "step-out detection function" of the dedicated controller can be used.
More Information
Name 80mm Diameter Platform, Motorized Rotation Stages with Rotary Encoder, 2-Phase Stepper Motor, M6 Thread
Weight 1.2000kgs
Guide
  • When the step-out detection function is not used, GSEF-CA-3 cable is not necessary. Please disable the step-out detection function on the controller side in that case.
Attention
  • Please use a controller for 2-phase stepping motors like the HIT-MV with HIT-SA-M2. Our other 5-Phase controllers will not operate properly with these stages
Load Capacity 98N (10.0kg)
Mounting Thread M6
Rotation Range Continuous 360 Degrees in CW and CCW
Stage Size φ80mm
Travel Mechanism (reduction ratio) Worm gear (1:144)
Positioning Slide Bearing method
Stage Material Aluminium and Aluminum bronze
Resolution (Full) 0.005 deg./pulse
Resolution (Half) 0.0025 deg./pulse
Minimum Incremental Motion (refurence) 0.5mdeg
MAX Speed 30 deg./sec
Positioning Accuracy 0.15 deg.
Positional Repeatability 0.02 deg.
Load Capacity 98N(10.0kgf)
Moment Stiffness 0.2arcsec/N-cm
Lost Motion 0.05 deg.
Backlash 0.08 deg.
Parallelism 50um
Concentricity 30um
Wobble 0.02mm
Sensor Part Number Micro photo sensor : PM-F25(SUNX Co., Ltd.)
Limit Sensor Equipped (NORMAL CLOSE)
Origin Sensor None
Proximity Origin Sensor None
Encoder Resolution 500 Pulses/Rev.
Step Angle 1.8 deg.
Stepping Motor Type 2-phase stepping motor 1.2A/phase
In stock
SKU
OSMS(RE)-80YAW-M6-M2
£2,342.60

Delivery in : 6-12 weeks

Based on our CE-compliant OSMS-YAW Series Rotation Motorized Stages, these models are equipped with a 2-phase stepping motor and rotary encoder. A rotary encoder built into the motor enables "Step-out detection" with a dedicated controller.

Resources & Downloads

We detect that you are accessing the website from a different region. You will be redirected to a local version of OptoSigma.

Your requested the page :

UNITED KINGDOM

Redirection to :