5W Broadband Thermal Sensor, 10 mJ - 5 J, 10-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller
PM5-12D-BB
The Opto Sigma PM5-12D-BB is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 5W with 100uW resolution. The PM5-12D-BB has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.
-
Name | 5W Broadband Thermal Sensor, 10 mJ - 5 J, 10-mm Sensor Aperture, used with PEM-TS-4.3 Stand-alone Controller |
---|---|
Weight | 0.2000kgs |
Guide | - |
Attention | - |
Energy Range | 10 mJ - 5 J |
Power Range | 10 mW - 5 W |
Wavelength Range | 0.19 - 25µm |
Aperture | 10mm |
Cooling | Convection |
Max intermittent Power | 45W |
Power Resolution | 100uW |
Noise Equivalent Power (NEP) | 500uW |
Response Time (0-90%) | 0.7s |
Power Calibration Uncertainty | +/-3% |
Power Linearity | +/-1% |
Energy Resolution | 0.1mJ |
Energy Calibration Uncertainty | +/-5% |
Type of Absorber | BBF |
Maximum Power Density | 200W/cm2 |
Max Energy Density | 5ms pulse width: 3.6 J/cm2, 10us pulse width: 0.2 J/cm2, 10ns pulse width: 0.1 J/cm2 |
Interface | DB15 Conector, Compatible with PEM-TS-4.3 Controller |
In stock
SKU
PM5-12D-BB
£821.20
The Opto Sigma PM5-12D-BB is a thermopile sensor designed for measuring power and energy of laser or light sources. It can read power levels up to 5W with 100uW resolution. The PM5-12D-BB has a DB15 connector and is designed to be used with PEM-TS-4.3 Stand-alone controller.