40X40mm EXC Bearing, Steel, XZ-Axis Stage, Center Micrometer, +/-6.5/3.0mm, 6-32 Threads

TSD-404CUU

Skip to the beginning of the images gallery

This XZ assembly incorporates an (X) axis steel linear stage and a (Z) vertical axis steel stage with a horizontal flat top plate.
There are options for micrometer position and fine pitch screws

Details

More Information

More Information
Name	40X40mm EXC Bearing, Steel, XZ-Axis Stage, Center Micrometer, +/-6.5/3.0mm, 6-32 Threads
Weight	0.4500kgs
Guide	Vacuum-compatible stainless steel stages (TSDS-404) are also available. (WEB Reference Catalog Code/W7064) The part number suffix FP indicates products with fine-pitch screws instead of standard micrometers. Fine Pitch screws have a screw pitch of 0.25mm and require a hex wrench or the optional hex wrench with knob (KCL) for adjustment.(WEB Reference Catalog Code/W8008-3)
Attention	This translation stage type is not suitable for inverted use. In this condition, all load would be pulling against the spring. These stages use a pivot mechanism to transfer horizontal motion to vertical motion. This mechanism induces a small non-linearity between the distance the micrometer moves and the distance the stage platform moves. Contact our Sales Division for more information.
Image Label	Steel Extended Contact XZ Stage 40x40mm Size Center Drive Inch Threads
Stage Size	40×40mm
Travel	X axis±6.5mm　Z axis±3mm
Load Capacity	88.3N (9.0kg)
Mounting Thread	6-32UNC
Moment Stiffness / Pitch	0.3″/N・cm
Moment Stiffness / Yaw	0.23″/N・cm
Moment Stiffness / Roll	0.2″/N・cm
Guide Method	Extended Contact Ball Bearing Guide
Travel Accuracy / Pitch	25″
Travel Accuracy / Yaw	15″
Travel Accuracy / Straightness	0.5μm
Running Parallelism	7μm
Max. Moment Capacity / Pitch	7.8N・m
Max. Moment Capacity / Yaw	5.0N・m
Max. Moment Capacity / Roll	7.8N・m
Primary material	Steel
Finish	Super black chrome

In stock

SKU

TSD-404CUU

£702.00

This XZ assembly incorporates an (X) axis steel linear stage and a (Z) vertical axis steel stage with a horizontal flat top plate.
There are options for micrometer position and fine pitch screws